 |
 |
 |
|
|
 | | SYS-5018D-MTLN4F | - SuperServer 5018D-MTLN4F (Black)
|
| | |
| | CPU | - Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
- Socket H3 (LGA 1150)
|
| | |
| | Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | Chipset | | | SATA | - SATA3 (6Gbps) w/ RAID 0, 1, 5, 10
- SATA2 (3Gbps) w/ RAID 0, 1
- SATA DOM Power Connector
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Aspeed AST2400 BMC with 10/100/1000Mbps
| | Network Controllers | - Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | VGA | |
| | |
| | Serial ATA | - 4x SATA3 (6Gbps) ports
- 2x SATA2 (3Gbps) ports
- SATA DOM Power Connector
| | LAN | - 4x RJ45 GbE LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 4x USB 3.0 ports (2 rear, 1 Type-A, 1 via header)
- 6x USB 2.0 ports (2 rear, 4 via header)
| | VGA | | | Serial Port / Header | - 2 COM ports (1 rear, 1 header)
|
| | |
| | Voltage | - Monitors for CPU Cores, 12V, +3.3V, +5V,+3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of Five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Weight | - Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
| | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 4x Network activity LEDs
- System Overheat LED
| | Ports | - 2x USB ports
- 1x Serial COM Port
|
| | |
| | PCI-Express | - 1x PCI-E 3.0 x16 Full-height slot
|
| | |
| | Hot-swap | - 4x 3.5" Hot-swap SATA3 HDDs w/ RAID
| | Peripheral Bay | - Slim optical drive (optional)
|
| | |
| SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller) |
| | |
| | Fans | - 4x 4cm 12,500 RPM PWM fans
- Optional fans to cool add-on cards
|
| | |
| | 350W AC power supply w/ PFC | | AC Voltage | - 100-240 V, 50-60 Hz, 4.2-1.8 Amp
| | +5V | | | +5V standby | | | +12V | | | +3.3V | | | Certification | 
Gold Certified
[ Test Report ] |
| | |
| | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| | |
| RoHS
| - RoHS2 (2011/65/EU) Compliant
| | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X10SLM+-LN4F
CSE-813MTQ-350CB | 1
1 | Super X10SLM+-LN4F Motherboard
1U Chassis | | Backplane | BPN-SAS-815TQ | 1 | BPN-SAS-815TQ-O-P | | Cable 1 | CBL-0157L | 1 | 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF | | Cable 2 | CBL-0186L | 1 | SET OF 4 SATA 56/45.5/35/23CM ROUND S-RA. 26AWG | | Riser Card | RSC-RR1U-E16 | 1 | RSC-RR1U-E16 with PCI-E x16 output | | Heatsink / Retention | SNK-P0046P | 1 | 1U PASSIVE CPU HS FOR INTEL LGA1156 | | Power Supply | PWS-351-1H | 1 | 1U 350W MULTI OUTPUT 80PLUS GOLD PWS | | Cable 3 | CBL-0049L | 1 | Front ctrl cable 16 PIN TO 16 PIN, LF, Flat (L=54cm) | | Fan 1 | FAN-0065L4 | 4 | 4028mm 13K RPM 4-PIN PWM FAN for SC813MF, SC113M | | Drive Tray(s) | MCP-220-00093-0B | 4 | Black 3.5 | | Mounting Rails | CSE-PT52 | 1 set | THIRD GENERATION GUIDE RAIL ASSY. Outer slides extendable length: 26" to 33.5" |
|
|
|
 |
|
 |
|
Key Features
1. Single socket H3 (LGA 1150) supports
Intel® Xeon® E3-1200 v3, 4th gen.
Core i3, Pentium, Celeron processors2. Intel® C224 Express PCH3. 4x 3.5" Hot-swap SATA3 HDDs4. 1x PCI-E 3.0 x16 Full-height slot5. Up to 32GB DDR3 ECC 1600MHz
UDIMMs in 4 sockets6. Quad Gigabit Ethernet LAN ports via
Intel® i210AT7. IPMI 2.0 on Dedicated LAN port8. 350W Gold Level Power Supply
|
|
|
|
|
|
|