Supermicro SBI-7125C-T3 Quad-core/dual-core Xeon DDR2 blade module, for superblade SBE-710E

Home > Special Offer >

Alternative Views:

Market Price $1,509.95

Product Code: SBI-7125C-T3

Qty:

Description

Technical Specs

Extended Information

Supermicro SBI-7125C-T3 Quad-core/dual-core Xeon DDR2 blade module, for superblade SBE-710E

Product SKUs

SBI-7125C-T3

Processor Blade SBI-7125C-T3 (Black)

Motherboard

Super B7DCL

Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor) Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor)
System Bus	1333 / 1066 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems

System Memory

Memory Capacity	Six 240-pin DIMM sockets Supports up to 48GB 667/533MHz DDR2 ECC Registered memory Memory must be populated in pairs
Memory Type	667/533MHz Registered DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	512MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage	1.8V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset	Intel® 5100 (San Clemente) chipset Intel® ICH9R
SATA	Intel ICH9R SB SATAII Controller RAID 0, 1 support
IPMI	Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM) Note: Support 1 CMM
Network Controllers	Intel® 82575EB Gigabit Ethernet Controller Intel® I/OAT support for fast, scaleable, and reliable networking
Super I/O	Winbond 83627DHG chip
Clock Generator	CK505 chip

Input / Output

KVM	1 Front Connector for Supermicro KVM Card

System BIOS

BIOS Type	16Mb SPI EEPROM with Phoenix ® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0/2.0 ACPI 1.0 (limited) USB Keyboard support Hardware BIOS Virus protection

Dimensions

Height	11.32" (288 mm)
Width	1.67" (42.4 mm)
Depth	18.9" (480mm)
Weight	8.6 lbs (3.9 kg)
Available Colors	Black

Front Panel

Buttons	Power On/Off button KVM button
LEDs	Power LED UID / KVM LED Network Activity LED Fault LED
Connector	SUV (Serial/USB/Video) & KVM Connector

Drive Bays

Hot-swap

3x 2.5" Hot-swap drive bays

Operating Environment / Compliance

Environmental Spec

Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Electromagnetic Compatibility (EMC)

United States / Canada	FCC- Emissions (US) Verification
Europe	EN55022 - Emissions EN55024 - Immunity EN61000-3-2 - Harmonics EN61000-3-3 - Voltage Flicker CE - EMC Directive 89/336/EEC