Supermicro SBI-7126TG Blade Module DP Xeon 5600 LGA1366 DDR3 IPMI GPU ready

Home > Special Offer >

Alternative Views:

Market Price $1,698.95

Product Code: SBI-7126TG

Qty:

Description

Technical Specs

Extended Information

Supermicro SBI-7126TG Blade Module DP Xeon 5600 LGA1366 DDR3 IPMI GPU ready

Product SKUs

SBI-7126TG

GPU SuperBlade SBI-7126TG (Black)

Motherboard

Super B8DTG

Processor/Cache

CPU	Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below: Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
GPU	Supports up to two NVIDIA Tesla M2050 and M2070 GPUs based on the CUDA Fermi architecture. Each GPU provides 448 CUDA cores and up to 6GB of GDDR5 memory.

System Memory

Memory Capacity	6x 240-pin DIMM sockets Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory Memory Mirroring supported
Memory Type	1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage	1.5 V and 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset	Intel® 5520 (Tylersburg) chipset ICH10 + IOH-36D
InfiniBand Support	4x QDR/DDR (40/20Gb/s) InfiniBand mezzanine HCA (Optional)
IPMI	Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
Network Controllers	Intel® 82576 Dual-Port Gigabit Ethernet Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization
Super I/O	Winbond 83527HG chip
Clock Generator	CK505 chip

Input / Output

KVM	1 Front Connector for Supermicro KVM Card

System BIOS

BIOS Type	32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support

Dimensions

Height	11.32" (288 mm)
Width	1.67" (42.4 mm)
Depth	18.9" (480mm)
Weight	8.6 lbs (3.9 kg)
Available Colors	Black

Front Panel

Buttons	Power On/Off button KVM button
LEDs	Power LED UID / KVM LED Network Activity LED Fault LED
Connector	SUV (Serial/USB/Video) & KVM Connector

Expansion Slot

PCI-Express

2 (x16) PCI-E 2.0 (FH/HL)
(Optional) supports up to 2x Fermi 2070/2050 GPUs (not included)

Drive Bays

Hot-swap

1x SATA Disk on Module

Operating Environment / Compliance

Environmental Spec

Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Electromagnetic Compatibility (EMC)

United States / Canada	FCC- Emissions (US) Verification
Europe	EN55022 - Emissions EN55024 - Immunity EN61000-3-2 - Harmonics EN61000-3-3 - Voltage Flicker CE - EMC Directive 89/336/EEC

Safety Compliance

United States / Canada	UL60950-1 - CSA/CUL 60950-1
Europe	EN60950-1, CE - Low Voltage Directive 73/23/EEE
Germany	TUV

Key Features

Up to two Tesla M2090 / M2075 / M2070Q / M2070 / M2050 GPUs
Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
Intel® 5520 (Tylersburg) Chipset
Up to 96GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 24GB Unbuffered DIMM
Intel® 82576 Dual-Port Gigabit Ethernet
2 PCI-E 2.0 x16 (FH/HL)
Integrated IPMI2.0 w/ remote KVM and virtual media
1x SATA Disk on Module
Integrated Matrox G200eW Graphics

Share your knowledge of this product. Be the first to write a review »