Supermicro 1U Server SYS-5014C-MT Barebone Single LGA775 Prescott ZIF Socket Supports an Intel Pentium 4 processor 2x Broadcom BCM5721 Gigabit LAN Controllers IPMI 2.0 Support 4 x 3.5" SATA Hot-swap Drive Bays 300W Cold-swap Power Supply Full Warranty

Home >

Alternative Views:

Price: $1,039.95

Membership Price (5% off): $987.95

Qty:

Key Features

Technical Specs

Extended Information

Product SKUs

SYS-5014C-MT	SuperServer 5014C-MT (Beige)
SYS-5014C-MTB	SuperServer 5014C-MTB (Black)


Motherboard

Super P8SCT


Processor/Cache

CPU	Single LGA775 (Prescott) Socket Supports an Intel® Pentium® 4processor 6x0 or 5x0 sequence on 90nm process ONLY (800MHz FSB) - including 2MB Cache Extreme Edition Supports an Intel® Celeron®processor (533MHz FSB) with 256 KB L2 cache Hyper-Threading enabled
System Bus	800 / 533 MHz system bus


System Memory

Memory Capacity	Four 240-pin DIMM sockets Supports up to 4 GB DDR2 400MHz/533MHz unbuffered ECC/non-ECC memory Dual channel memory bus
Memory Type	DDR2 400/533MHz unbuffered ECC/non-ECC SDRAM, 72-bit, 240-pin, gold-plated DIMMs
DIMM Sizes	256Mb, 512Mb, 1Gb densities 256MB, 512MB, 1GB SDRAM modules Total 128MB to 4GB memory capacity
Memory Voltage	1.8V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

Chipset	Intel E7221 (Copper River) chipset ICH6R + PXH-V
Serial ATA	SATA controller integrated in Intel® ICH6R RAID 0, 1, 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
Network Controllers	2x Broadcom BCM5721 Gigabit Ethernet Controllers Supports 100/1000BASE-T, RJ45 output
Graphics	Onboard integrated server quality video graphics in MCH
Super I/O	Winbond 83627HF chip
Clock Generator	ICH954101DF


Expansion Slots

PCI-Express / PCI-X	1x 64-bit PCI-X 133MHz slot (Riser card required)


Input / Output

Serial ATA	Four Serial ATA ports Four SATA hard drives supported
IDE	One EIDE channel supports up to two UDMA / IDE devices Supports PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB,
LAN	2x RJ45 LAN port
USB	2x rear USB 2.0 / 1.1 ports 4x USB 2.0 / 1.1 internal headers for 4x ports
VGA	1x VGA port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Ports	1x Fast UART 16550 serial ports 1x serial header
Parallel Port	1x ECP/EEP Parallel Port


System BIOS

BIOS Type	8Mb Flash EEPROM with Award BIOS® 49LF008A/SST
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 DMI 2.3 ACPI 1.0 (limited) BIOS Rescue hot keys USB Keyboard support SMBIOS 2.3 RTC (Real Time Clock) Wakeup


Chassis

Form Factor	1U Rackmount
Model	SC813MT-300C


Dimensions

Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	19.8" (503mm)
Gross Weight	34.5 lbs (15.6kg)
Available Colors	Beige, Black


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Failure LED
Ports	2x USB Ports (USB 2.0 Ready) 1x Serial COM Port


Drive Bays

Hot-swap	4x 3.5" Hot-swap SATA drive bays


Peripheral Drives

CD-ROM	TEAC Slim 24x CD-ROM drive


SATA Backplane

1x SATA Backplane


System Cooling

Fans	3x 12.5K RPM fans


Power Supply

Fixed 300W AC power supply module w/ PFC [ 24-pin, (4-pin=12V) ]
AC Voltage	100 - 240V, 60-50Hz, 5 Amp Max
DC Output	12V₁ + 12V₂ Current ≤ 20A 5V + 3.3V Power ≤ 140W
+5V	15.0 Amp
+5V standby	2.0 Amp
+12V₁	15.0 Amp
+12V₂	15.0 Amp
-12V	1.0 Amp
+3.3V	15.0 Amp


Regulatory (Power Supply)

Safety / EMC	USA - UL Listed, FCC Canada - CUL listed Germany - TUV Certified Europe/CE Mark EN 60950/IEC 60950-Compliant


PC Health Monitoring

CPU	Monitors for CPU Core, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN	Total of five 3-pin fan headers 5x fans with tachometer monitoring Status monitor for speed control Low noise fan speed control
Temperature	Monitoring for CPU, chassis environment CPU thermal trip support I²C temperature sensing logic Thermal Monitor 2 (TM2) Support
LED	CPU / System Overheat LED Suspend-state indicator LED +5V standby alert LED
Other Features	Chassis intrusion header SDDC

Key Features
1. Intel® Pentium® 4 LGA775 Package
800MHz FSB, Celeron® 533MHz FSB

2. Up to 4GB DDR2 400 / 533MHz
Unbuffered ECC / Non-ECC SDRAM

3. 1 x 64-bit 133MHz Full-height
/ half-length PCI-X Slot

4. 2x Broadcom BCM5721 Gigabit LAN
Controllers

5. IPMI 2.0 Support

6. 4 x 3.5" SATA Hot-swap
Drive Bays

7. 300W Cold-swap Power Supply