 |
 |
 |
|
|
 | | SYS-5016T-MTFB | - SuperServer 5016T-MTFB (Black)
|
| | |
| | CPU | - LGA 1366 Socket
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP) - NOTE: Intel Xeon® 3500 Series and Core™ i7 are Not Supported (Max TDP > 100 Watts)
| | System Bus | |
| | |
| | Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory
- Three Channel memory bus
- 6 DIMM sockets
| | Memory Type | - 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 256MB, 512MB, 1GB, 2GB, 4GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| | |
| | Chipset | - Intel® X58 Express chipset
- ICH10R
| | SATA | - Intel ICH10R SATA (3.0Gbps) Controller
- RAID 0, 1, 5, 10 support
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - 2x Intel® Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | VGA | | | Super I/O | | | Clock Generator | |
| | |
| | PCI-Express | |
| | |
| | Serial ATA | - Six SATA ports
- Six SATA hard drives supported
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal header(4 ports)
- Total 8 USB 2.0 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
| | |
| | BIOS Type | - 4Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|  | | |
| | Form Factor | | | Model | - SC813MTQ-280CB
(Chassis not sold separately)
|
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
| | Ports | - 2x Front USB Ports
- 1x Serial COM Port
|
| | |
| | Hot-swap | - 4x 3.5" SATA Hot-swap drive bays
|
| | |
| | Fans | |
| | |
| | 280W AC power supply w/ PFC | | AC Voltage | - 100 - 240V, 50 - 60Hz, 5Amp
| | +5V | | | +5V standby | | | +12V | - 23Amp @ 100-140V, 27Amp @ 180-240V
| | -12V | | | +3.3V | |
| | |
| | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| | |
| RoHS
|
 | | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X8STi-FCSE-813MTQ-280C(B) | 1
1 | Super X8STi-F Motherboard
1U SC813MTQ-280C Chassis (B = Black) | | Air Shroud | MCP-310-18009-0N | 1 | Air Shroud | | Backplane | BPN-SAS-815TQ | 1 | BPN-SAS-815TQ-O-P | | Cable 1 | CBL-0157L | 1 | 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF | | Cable 2 | CBL-0201L | 1 | SATA SET OF 4 51/47/41/37CM. S-RA. 26AWG | | Cable 3 | CBL-0206L | 1 | 48CM SATA ROUND S-S PBF. 26AWG | | Cable 4 | CBL-0230L | 1 | 65CM SATA ROUND S-RA PBF. 26AWG | | Cable 5 | CBL-0341L | 1 | 1CH internal 10 pin to 4 pin USB 2.0 cable for LCD,DVD, 70cm. 28/24AWG | | Adapter 1 | CDM-USATA-G-O-P | 1 | mini-SATA to USB adapter for slim DVD | | Peripheral Drive 1 *** | DVM-PNSC-DVD-SBT1 | 1 | BLACK PANASONIC SLIM DVD ROM SATA DRIVE | | Peripheral Drive 1 *** | DVM-TEAC-DVD-SBT2 | 1 | BLACK TEAC SLIM DVD ROM SATA DRIVE ROHS | | CD | CDR-X8-UP | 1 | DRIVER CD FOR X8 UP MOTHERBOARD | | Riser Card | RSC-RR1U-E16 | 1 | RSC-RR1U-E16 with PCI-E x16 output | | Heatsink / Retention | SNK-P0036 | 1 | 1U PASSIVE CPU HS FOR INTEL LGA1366 X8 UP MB | | Power Supply | PWS-281-1H | 1 | AC TO DC HIGH EFFICIENCY 280W PWS | | Cable 6 | CBL-0049L | 1 | Front ctrl cable 16 PIN TO 16 PIN, LF, Flat (L=54cm) | | Fan 1 | FAN-0061L4 | 4 | 40X28MM 4-PIN PWM FAN FOR SC813 | | Mounting Rails | CSE-PT52 | 1 set | THIRD GENERATION GUIDE RAIL ASSY. Outer slides extendable length: 26" to 33.5" | | Hard Drive Carrier(s) | CSE-PT39-(B)OEM | 4 | Hard Drive Carrier (B = Black) |
|
| | | |
| | | Part Number | Qty | Description | | Front Bezel | CSE-PTFB-813 | - | 1U Front Bezel Cover | | Peripheral Drives | FPD-TEAC-S(B) | - | Slim Floppy Drive (B = Black) |
|
|
|
|
|
 |
|
 |
|
Key Features
1. Intel® Xeon® 5600/5500 series
(QPI up to 6.4 GT/s)2. Up to 24GB DDR3 1333, 1066 & 800
ECC / non-ECC Un-Buffered DIMM3. 1 (x16) PCI-Express 2.04. Dual Intel® 82574L Gigabit Ethernet
Controller5. Integrated IPMI2.0 with Dedicated LAN6. 4x 3.5" Hot-swap SATA Drive Bays7. 280W Power Supply
|
|
|
|
|
|
|