|
 | | SYS-8014T-T | - SuperServer 8014T-T (Beige)
| | SYS-8014T-TB | - SuperServer 8014T-TB (Black)
|
| | |
| | CPU | - Quad 604-pin FC-mPGA4 Sockets
- Supports up to four Intel® 64-bit Xeon® processor(s) of the same type below:
- Dual-Core Intel® Xeon® Processor 7100 Series with 2MB L2 Integrated Advanced Transfer Cache
- (CPUs must be 95W or less)
| | System Bus | | | Operating System Software | - Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| | |
| | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 64GB ECC DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs and all be of same type
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| | |
| | Chipset | - Intel® E8501 chipset
- MCH + ICH5R + PXH + 82571
| | SATA | - ICH5R SATA Controller
- RAID 0, 1, JBOD support
| | IPMI | | | Network Controllers | - Dual Intel® 82571 Single Port PCI-e Gigabit Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI ES1000 SVGA PCI video controller with 16 MB of video memory
| | Super I/O | |
| | |
| | Serial ATA | - Two Serial ATA ports
- Two SATA hard drives supported
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB
| | LAN | | | USB | - 2x USB rear ports
- 2x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
| | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- ACPI 1.0 (limited)
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| | |
| | PCI-Express | |
| | |
| | Hot-swap | - 2x 3.5" Hot-swap SATA Drives Supported
- 1x Spare Hot-swap bay
|
| | |
| | 1U SATA / SAS Backplane |
| | |
| | DVD-ROM | - Slim 8x DVD, 24x CD, DVD-ROM drive
|
| | |
| | Fans | - 6x heavy-duty counter-rotating fans with optimal fan speed control
| | Shroud | |
| | |
| | 1000W AC-DC high-efficiency power supply w/ PFC + PDB | | AC Voltage | - 100 - 240V, 50 - 60Hz, 15 - 7Amp
| | +5V standby | | | +12V | | | With Power Distributor | - +5V: 20 Amp
- +3.3V: 20 Amp
- -12V: 0.6 Amp
|
| | |
| | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
- CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
| | FAN | - Total of nine 4-pin and four 3-pin fan headers
- 9x fans with status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin Fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x Fan Connectors
- I2C Temperature Sensing Logic
- Thermal Monitor 2 support
| | LED | | | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| | |
| Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
