 |
 |
 |
|
|
SBI-7425C-T3
|
Processor Blade SBI-7425C-T3 (Black)
|
|
CPU
|
Dual 771-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor)
Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey processor)
|
|
System Bus
|
1333 / 1066 MHz system bus
|
|
Operating System Software
|
Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
|
|
Memory Capacity
|
Six 240-pin DIMM sockets
Supports up to 48GB 667/533MHz DDR2 ECC Registered memory
Memory must be populated in pairs
|
|
Memory Type
|
667/533MHz Registered DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes
|
512MB, 1GB, 2GB, 4GB, 8GB
|
|
Memory Voltage
|
1.8V
|
|
Error Detection
|
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
|
|
Chipset
|
Intel® 5100 (San Clemente) chipset
Intel® ICH9R
|
|
SATA
|
Intel ICH9R SB SATAII Controller
RAID 0, 1 support
|
|
IPMI
|
Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
Note: Support 1 CMM
|
|
Network Controllers
|
Intel® 82575EB Gigabit Ethernet Controller
Intel® I/OAT support for fast, scaleable, and reliable networking
|
|
Super I/O
|
Winbond 83627DHG chip
|
|
Clock Generator
|
CK505 chip
|
|
KVM
|
1 Front Connector for Supermicro KVM Card
|
|
BIOS Type
|
16Mb SPI EEPROM with Phoenix ® BIOS
|
|
BIOS Features
|
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
Hardware BIOS Virus protection
|
|
Height
|
11.32" (288 mm)
|
|
Width
|
1.19" (30.2 mm) |
|
Depth
|
18.9" (480mm)
|
|
Weight
|
8.6 lbs (3.9 kg)
|
|
Available Colors
|
Black
|
|
Buttons
|
Power On/Off button
KVM button
|
|
LEDs
|
Power LED
UID / KVM LED
Network Activity LED
Fault LED
|
|
Connector
|
SUV (Serial/USB/Video) & KVM Connector |
|
Hot-swap
|
3x 2.5" SAS/SATA Hot-swap drive bays |
|
Operating Environment / Compliance
|
|
Environmental Spec
|
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
Electromagnetic Compatibility (EMC)
|
|
United States / Canada
|
FCC- Emissions (US) Verification
|
|
Europe
|
EN55022 - Emissions
EN55024 - Immunity
EN61000-3-2 - Harmonics
EN61000-3-3 - Voltage Flicker
CE - EMC Directive 89/336/EEC
|
|
United States / Canada
|
UL60950-1 - CSA/CUL 60950-1 |
|
Europe
|
EN60950-1, CE - Low Voltage Directive 73/23/EEE |
|
Germany
|
TUV
|
|
|
Part Number
|
QTY
|
Description
|
|
Motherboard
|
MBD-B7DCL-O-P
|
1
|
Super B7DCL Motherboard
|
|
Chassis
|
CSE-714M-230B |
1
|
Black Front Blade Chassis (B = Black)
|
|
Hard Drive Tray
|
MCP-220-00047-0B |
3
|
Black 2.5" Hard Drive Tray
|
|
Front Panel Control
|
MCP-280-KVM1
|
1
|
Power & KVM buttons, LED, KVM connector
|
|
|
Part Number
|
QTY
|
Description
|
|
Heatsink / Retention
|
SNK-P0032P
|
2
|
Heatsink for Intel CPU
|
|
|
|
 |
|
 |
|
Key Features
- Dual Intel® 64-bit Xeon® Quad-Core
or Dual-Core, with 1333 / 1066
MHz FSB
- Intel® 5100 (San Clemente) chipset
- Up to 24GB Reg. ECC VLP DDR2
667 / 533 SDRAM
- Intel® 82575EB Gigabit Ethernet
Controller
- 3x 2.5" Hot-swap SATA Drive Trays
- On board Winbond® integrated 32MB
Graphics
|
|
|
|
|
|
|