Product SKUs

SYS-2028U-TRTP+

• SuperServer 2028U-TRTP+ (Black)

Motherboard

Super X10DRU-i+

Processor/Cache

CPU

• Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *

• Dual Socket R3 (LGA 2011)

Cores / Cache

• Up to 22 Cores† / Up to 55MB† Cache

System Bus

• QPI up to 9.6 GT/s

Note

† BIOS version 2.0 or above is required

Note

* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory

Memory Capacity

• 24x 288-pin DDR4 DIMM slots

• Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM

Memory Type

• 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

• 2666/2400 ECC DDR4 NVDIMM

DIMM Sizes

• RDIMM: 32GB, 16GB, 8GB, 4GB

• LRDIMM: 64GB, 32GB

• 3DS LRDIMM: 128GB

• NVDIMM: 16GB

Memory Voltage

• 1.2 V

Error Detection

• Corrects single-bit errors

On-Board Devices

Chipset

• Intel® C612 chipset

SATA

• SATA3 (6Gbps) with RAID 0, 1, 5, 10

IPMI

• Support for Intelligent Platform Management Interface v.2.0

• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

• ASPEED AST2400 BMC

Network Connectivity

• 2x 10G SFP+ ports via AOC-2UR68-i2XS

• Intel® 82599ES 10G SFP+

• 1x Realtek RTL8211E PHY (dedicated IPMI)

Graphics

• ASPEED AST2400 BMC

Input / Output

SATA

• 10x SATA3 (6Gbps) ports

SAS

• 24x SAS3 ports support via optional Add-on Cards

LAN

• 2x 10G SFP+ ports

• 1x RJ45 Dedicated IPMI LAN port

USB

• 5x USB 3.0 ports
  (2 rear, 2 onboard header, 1 Type A)

Video

• 1x VGA Connector

Serial Port / Header

• 1x Serial header

DOM

• 2x SuperDOM (Disk on Module) ports

System BIOS

BIOS Type

• 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features

• Plug and Play (PnP)

• APM 1.2

• PCI 2.3

• ACPI 1.0 / 2.0 / 3.0 / 4.0

• USB Keyboard support

• SMBIOS 2.7.1

• UEFI 2.3.1

Management

Software

• SuperDoctor® 5

• Intel® Node Manager 3.0

• Watch Dog

• NMI

• SUM and SSM

• Optional IPMI 1.5 / 2.0

Power Configurations

• ACPI Power Management

• Power-on mode for AC power recovery

Chassis

Form Factor

• 2U Rackmount

Model

• CSE-219UAC-R1K02

Dimensions and Weight

Width

• 17.2" (437mm)

Height

• 3.5" (89mm)

Depth

• 27.76" (705.3mm)

Weight

• Net Weight: 36 lbs (16.4 kg)

• Gross Weight: 72 lbs (32.7 kg)

Available Colors

• Black

Front Panel

Buttons

• Power On/Off button

• System Reset button

• UID button

LEDs

• Power status LED

• HDD activity LED

• 2x Network activity LEDs

• System information (overheat/UID) LED

Expansion Slots

PCI-Express

• 1x PCI-E 3.0 x16 slot (FH, 10.5" L)

• 7x PCI-E 3.0 x8 slots
  (5x FH, 10.5" L, 1x LP, 1x Internal LP)
  
  (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays

Hot-swap

• 24x Hot-swap 2.5" Drive Bays:
  10x SATA3 ports by default

• Optional drive support: 24x SAS3
  
  Note: optional storage card is required to support more than 10 drives.

Backplane

2U SAS3 backplane

System Cooling

Fans

• 4x 8cm heavy duty PWM fans

Power Supply

1000W Redundant Power Supplies with PMBus

Total Output Power

• 800W/1000W

Dimension
(W x H x L)

• 73.5 x 40 x 203 mm

Input

• 100-127Vac / 9.8 - 7A / 50-60Hz

• 200-240Vac / 7 - 5A / 50-60Hz

• 200-240Vdc / 7 - 5A (for CCC only)

+12V

• Max: 66.7A / Min: 0A (100-127Vac)

• Max: 83A / Min: 0A (200-240Vac)

• Max: 83A / Min: 0A (200-240Vdc)

12Vsb

• Max: 2.1A / Min: 0A

Output Type

• 25 Pairs Gold Finger Connector

Certification

UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ]

PC Health Monitoring

Voltage

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.

• 5+1 Phase-switching voltage regulator

FAN

• 8x 4-pin fan headers

• Status monitor for speed control

• Pulse Width Modulated (PWM) fan connectors

Temperature

• Support to monitor Supermicro AOC temperatures from IPMI or SD 5

• Monitoring for CPU and chassis environment

• CPU thermal trip support

• Thermal Control for 8x Fan Connectors

• Thermal Monitor 2 (TM2) support

• PECI

LED

• Memory DIMM ECC error LEDs

• CPU / System Overheat LED

• Suspend static indicator LED

• UID/Remote UID

Other Features

• 4x 8-pin GPU power connectors

• Chassis intrusion detection

• Chassis intrusion header

• SDDC Support

• RoHS

Operating Environment / Compliance

RoHS

• RoHS Compliant

Environmental Spec.

• Operating Temperature:
  10°C to 35°C (50°F to 95°F)

• Non-operating Temperature:
  -40°C to 60°C (-40°F to 140°F)

• Operating Relative Humidity:
  8% to 90% (non-condensing)

• Non-operating Relative Humidity:
  5% to 95% (non-condensing)