|
 | | SYS-6024H-82R | - SuperServer 6024H-82R (Beige)
| | SYS-6024H-82RB | - SuperServer 6024H-82RB (Black)
|
| | |
| | CPU | - Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
| | System Bus | | | Operating System Software | |
| | |
| | Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 16 GB DDR2 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
| | Memory Type | - DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | | | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| | |
| | Chipset | - Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
| | SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI
- Host RAID 0, 1, 10, JBOD support
- No Zero Channel RAID Support
| | IPMI | | | Network Controllers | - Intel® 82546GB Dual Port Gigabit Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Graphics | - ATI Rage XL SVGA PCI video controller with 8 MB of video memory
| | Super I/O | |
| | |
| | IDE | - Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| | Floppy | - 1 Floppy controller; 1.44 MB, 2.88 MB
| | LAN | | | USB | - 2x USB rear ports
- 3x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
| | VGA | | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | Parallel Port | |
| | |
| | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
| | BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
|  | | | |
| | Height | 3.5" (89mm) | | Width | 16.8" (426mm) | | Depth | 25.6" (650mm) | | Gross Weight | 57.5 lbs (26.1kg) | | Available Colors | Beige, Black |
| | |
| | Buttons | • Power On/Off button
• System Reset button | | LEDs | • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED | | Ports | 2x USB Ports (optional) |
| | |
| | PCI-X | - 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
- (Via Riser Cards)
|
| | |
| | Hot-swap | 6x 3.5" SCA Hot-swap drive trays | | Peripheral Bay(s) | 1x 5.25" full-height peripheral bay |
| |
| | Floppy | - Panasonic 3.5" 1.44MB Floppy Drive
| | CD-ROM | - TEAC Slim 24x CD-ROM drive
|
| | |
| | Single Channel SCSI backplane with SAF-TE |
| | |
| | Fans | 4x 80mm 6300 RPM fans
Cooling redundancy with fan shroud |
| | |
| 500W (1 + 1) Redundant AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] | | AC Voltage | • 100 - 240V, 50/60Hz, 10 Amp | | DC Output | • 5V + 3.3V ≤ 160W
• 12V Total ≤ 39 Amp | | +5V | 30.0 amp | | +5V standby | 2.0 amp | | +12V1 | 15.0 amp | | +12V2 | 15.0 amp | | +12V3 | 18.0 amp | | -12V | 1.0 amp | | +3.3V | 21.0 amp |
| | |
| | CPU | - Monitors for CPU Cores, +3.3V, +5V, ±12V & +3.3V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.86V-1.63V
| | FAN | - Total of four 4-pin and four 3-pin fan headers
- 8x fans with status monitoring
- Status monitor with firmware/software on/off control
- Low noise fan speed control
- 4x Pulse Width Modulated (PWM) fan connector
| | Temperature | - Monitoring for CPU, chassis, environment
- CPU thermal trip support
- Thermal Monitor 2 support
| | LED | - CPU Overheat LED
- System Overheat LED
- Suspend-state indicator LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
|
