Supermicro 2U Server SYS-6025B-T Dual Intel 64-bit Xeon Quad-Core or Dual-Core, 667/1066/1333MHz FSB Intel (ESB2/Gilgal) 82563EB Dual-port GbE 6 x 3.5" Hot-swap SATA Drive Bays 550W Power Supply Full Warranty

Home >

Alternative Views:

Price: $1,997.95

Membership Price (5% off): $1,898.05

Qty:

Key Features

Technical Specs

Extended Information

Product SKUs

SYS-6025B-T	SuperServer 6025B-T (Beige)
SYS-6025B-TB	SuperServer 6025B-TB (Black)


Motherboard

Super X7DBE


Processor/Cache

CPU	Dual 771-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100/5000 sequence (Wolfdale /Woodcrest/Dempsey processor)up to 3.40 GHz NOTE: Motherboard PCB revision 2.0 or above is required to support Xeon® 5100 (Woodcrest) processors
System Bus	1333 / 1066 / 667 MHz system bus
Operating System Software	Supports 64-bit Operating Systems Supports 32-bit Operating Systems


System Memory

Memory Capacity	Eight 240-pin DIMM sockets Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory Dual branch memory bus Memory must be populated in pairs
Memory Type	667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	512 MB, 1GB, 2GB, 4GB
Memory Voltage	1.8V only 1.5V(AMB)
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5000P (Blackford) chipset MCH + PXH + ESB2
SATA	Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 200-pin IPMI slot (SIMLP) (Optional: AOC-SIMLP-B(+)) (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
Network Controllers	Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics	ATI ES1000 controller with 16 MB of video memory
Super I/O	Winbond 83627HG chip


Input / Output

Serial ATA	Six Serial ATA ports Six SATA hard drives supported
IDE	Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card Compact Flash (40-pin connector, IDE 1, single channel) slot Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB
LAN	2x RJ45 LAN port
USB	2x USB rear ports 3x USB internal headers Total 5 USB 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header
Parallel Port	1 ECP / EEP parallel port


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features	Plug and Play (PnP) SMBIOS 2.3 DMI 2.1 PCI 2.2 ACPI 1.0 USB Keyboard support Hardware BIOS Virus protection


Chassis

Form Factor	2U Rackmount
Model	SC823TQ-550LP


Dimensions

Height	3.5" (89mm)
Width	16.8" (426mm)
Depth	25.6" (650mm)
Gross Weight	51 lbs (23.1kg)
Available Colors	Beige, Black


Front Panel

Buttons	• Power On/Off button • System Reset button
LEDs	• Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED
Ports	2x USB Ports (optional)


Expansion Slots

PCI-Express	2 (x8) PCI-e slots 1 (x4) PCI-e (using x8) slot
PCI-X	2x 64-bit 133MHz PCI-X (3.3V) slots 1x 64-bit 100MHz PCI-X (3.3V) slot


Drive Bays

Hot-swap	6x 3.5"SATA Hot-swap drive trays
Peripheral Bay(s)	1x 5.25" full-height peripheral bay


Peripheral Drive(s)

DVD-ROM	Panasonic 8x DVD, 24x CD, DVD-ROM Drive
Floppy	TEAC 3.5" 1.44MB Floppy Drive (beige / black)


SATA Backplane

1x 2U SATA Backplane w/ Enclosure Management


System Cooling

Fans	4x 80mm 6300 RPM fans
Shroud	1x Air Shroud


Power Supply

550W power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ]
AC Voltage	100 - 240V, 47-63Hz, 9/3.5 Amp
DC Output	+5V & +3.3V : Max = 50A
+5V	35.0 Amp
+5V standby	2.0 Amp
-5V	0.8 Amp
+12V	42.0 Amp
-12V	1.0 Amp
+3.3V	30.0 Amp


PC Health Monitoring

CPU	Monitors for CPU Cores, +3.3V, +5V, ±12V, +1.2V 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans 8x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support
LED	CPU / System Overheat LED
Other Features	Chassis intrusion detection Chassis intrusion header SDDC Support


Operating Environment / Compliance
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)

Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core
or Dual-Core, with 667 / 1066 / 1333
MHz FSB

2. Up to 32GB DDR2 667 & 533 SDRAM
Fully Buffered DIMM (FB-DIMM)

3. 2 (x8) & 1 (x4) PCI-Express,
2x 64-bit 133MHz PCI-X,
1x 64-bit 100MHz PCI-X
Low-profile Expansion Slots

4. Intel® (ESB2/Gilgal) 82563EB Dual-port
Gigabit Ethernet Controller

5. 6 x 3.5" Hot-swap SATA Drive Bays

6. 550W Power Supply