Supermicro 2U Server Barebone SYS-6026TT-H6IBQRF Intel Xeon processor 5600/5500 series Integrated IPMI 2.0 with KVM and Dedicated LAN Dual IntelÂ® 82574L GbE 3x 3.5" Hot-swap SAS Drives 1400W Redundant Power Supplies Full Warranty

Home >

Supermicro 2U Server Barebone SYS-6026TT-H6IBQRF Intel Xeon processor 5600/5500 series Integrated IPMI 2.0 with KVM and Dedicated LAN Dual Intel® 82574L GbE 3x 3.5" Hot-swap SAS Drives 1400W Redundant Power Supplies Full Warranty

Alternative Views:

Price: $6,590.99

Membership Price (5% off): $6,261.44

Qty:

Key Features

Technical Specs

Extended Information

Product SKUs

SYS-6026TT-H6IBQRF	SuperServer 6026TT-H6IBQRF (Black)


Motherboard

4x Super X8DTT-HIBQF+


Processor/Cache

CPU	Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
QPI	up to 6.4 GT/s


System Memory

Memory Capacity	12x 240-pin DIMM sockets Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported
Memory Type	1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices (per Node)

Infiniband	Mellanox ConnectX QDR Infiniband 40Gbps Controller
Chipset	Intel® 5520 (Tylersburg) chipset ICH10R
SAS	LSI 6Gbps SAS 2108 w/ Hardware RAID support via BPN-ADP-SAS2-H6iR RAID 0, 1, 5 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Dual Intel® 82574L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW
Super I/O	Winbond W83527HG chip
Clock Generator	932S421 chip


Input / Output (per Node)

SAS	3 SAS hard drives supported
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2 rear 2 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Serial Port	1 Fast UART 16550 serial port
Infiniband	1 External QSFP Infiniband Connector


System BIOS (per Node)

BIOS Type	32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support


Chassis

Form Factor	2U Rackmount
Model	CSE-827HQ-R1400B


Dimensions

Height	3.5" (89mm)
Width	17.2" (437mm)
Depth	28.5" (724mm)
Gross Weight	85 lbs (38.6kg)
Available Colors	Black


Front Panel (per Node)

Buttons	Power On/Off button UID button
LEDs	Power LED (on power button) Network activity LED System Overheat/fan fail/power fail/ LED UID LED (on UID button)


Expansion Slots (per Node)

PCI-Express	1 (x8) PCI-E 2.0 via riser card (low-profile)


Drive Bays (per Node)

Hot-swap	3x 3.5" hot-swap SAS drive bays


Hard drive Backplane

2U Hard drive Backplane


System Cooling

Fans	4x 8cm PWM Cooling Fans with Optimal fan speed control


Power Supply

1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input	1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
DC Output	1100W: +12V/92A; +5Vsb/4A 1400W: +12V/116A; +5Vsb/4A
With Distributor	+5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp
Certification	Gold Certified [ Test Report ]


PC Health Monitoring

CPU	Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator
FAN	Total of four 4-pin PWM fans 4x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 4x Fan Connectors PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	Power Fail / Overheat LED Suspend-state Indicator LED UID LED
Other Features	SDDC Support


Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Key Features

1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s

2. Up to 192GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM / 48GB
Unbuffered DIMM

3. 1 (x8) PCI-E 2.0 (low-profile) with
riser card

4. Integrated IPMI 2.0 with KVM and
Dedicated LAN

5. Dual Intel® 82574L Gigabit
Ethernet Controller

6. 3x 3.5" Hot-swap SAS Drives

7. 1400W Redundant Power Supplies
80 PLUS, Gold Level Certified

8. Mellanox ConnectX QDR Infiniband
40Gbps Controller w/ QSFP connector