 |
 |
 |
|
|
 | | SYS-5086B-TRF | - SuperServer 5086B-TRF (Black)
|
| | |
|
X8OBN-F (1) + X8OBN-CPU (4) + X8OBN-BR1 (2) |
| | |
| | CPU | - Octal 1567-pin LGA Sockets
- Supports up to eight Intel® Xeon® 64-bit processor(s) of the same type below:
- Intel® Xeon® processors 7500^series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-8800 family (10-core, codename Westmere-Ex) supported
| | QPI | |
| | |
| | Memory Capacity | - 64x 240-pin DIMM sockets
- Supports up to 2048 GB DDR3 ECC reg. memory
| | Memory Type | - 1333* / 1066 / 978 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 1GB, 2GB, 4GB, 8GB, 16GB, 32GB**
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| | |
| | Chipset | - 2x Intel® 7500 (Boxboro-EX) chipset
- ICH10R
| | SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® 82576 Dual-Port Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY
(dedicated IPMI)
| | Graphics | | | Super I/O | |
| | |
| | LAN | - 3x RJ45 LAN ports (1 for IPMI)
| | USB | - Total of 8 USB 2.0 ports (2x rear,
4 via 2x internal headers, 2x Type A)
| | SATA | | | Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
| | VGA | |
| | |
| | BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Height | | | Width | | | Depth | | | Weight | - Gross Weight: 176 lbs (79.83 kg)
| | Available Colors | |
| | |
| | Hot-swap | | | Peripheral Bay(s) | |
| | |
| | PCI-Express | - 4x PCI-E 2.0 x16 + 2x PCI-E 2.0 x8 (in x16) or 10x PCI-E 2.0 x8 full-height, full-length slots
|
| | |
| | Fans | - 4x Hot-Swap Cooling Fans
- 2x Hot-Swap Rear Exhaust Fan
| | Shrouds | - 4x CPU card air shrouds for SC758
|
| | |
| | 2800W (2+2) Redundant 1400W high-efficiency power supply with PMBus | | AC Input | - 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
- 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
| DC Output
+5V standby | | DC Output
+12V | - 100 Amp @ 100-140V
- 117 Amp @ 180-240V
| | Certification | 
Gold Certified
[ Test Report ] |
| | |
| | CPU | - Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
| | FAN | - 10x 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
| | Temperature | - Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
| | Other Features | - Chassis intrusion detection
|
| | |
| | Environmental Spec. | - Operating Temperature:
10° to 35° C (50° to 95°F) - Non-operating Temperature:
-40° to 70° C (-40° to 158° F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X8OBN-F
MBD-X8OBN-CPU
MBD-X8OBN-BR1
CSE-758A-R2800BP | 1
4
2
1 | X8OBN base board (for server SKU only)
X8OBN processor board (for server SKU only)
X8OBN bridge board (for server SKU only)
SC758 incomplete 5U Chassis (for server SKU only) | | Backplane | BPN-SAS-I28A | 2 | BPN-SAS-I28A | | Cable 1 | CBL-0116L | 2 | IPASS TO 4 SATA 50CM CROSS OVER PBF. 26AWG | | Cable 2 | CBL-0449L | 2 | HDD power extension for X8OBN, special 8 pin to 4 HDD. 47cm. 18AWG | | CD | CDR-X8-O | 1 | Driver CD for X8-O series motherboard | | Heatsink / Retention | SNK-P0044P+ | 8 | Special CPU heatsink for Nehalem-EX | | Power Supply | PWS-1K41F-1R | 4 | 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM | | I/O Shield | MCP-260-00027-0N | 1 | Std I/O shield for X8, H8, X7SB3 server MB (3rd LAN + 4x LAN) | | Mounting Rails | MCP-290-00057-0N | 1 set | Rail set, quick/quick, default for 4U 17.2"W |
|
| | | |
| | | Part Number | Qty | Description | | Mounting Rail | MCP-290-00058-0N | - | Short rail set, quick/quick, optional for 2~4U 17.2"W | | Add on cards | AOC-SAS2LP-H8iR
AOC-SAS2LP-H4iR
AOC-STGN-i2S
AOC-E10GSFPSR
AOC-MHQH29B-XTR
AOC-MHQH29C-XTR
AOC-QLE2562 | -
-
-
-
-
-
- | 2108 based SAS/SATA RAID- 8 internal ports/Low profile-PCI-E
2108 based SAS/SATA RAID- 4 internal ports & 4 external ports
STD Dual-port 10G Ethernet with SFP+ W/ CDR
OPTI MOD 10G SR/1000BASE-SX FOR E10G42BTDA
MHQH29B-XTR,IB 2-P QDR,PCIe2.0,QSFP,PBF
MHQH29C-XTR,IB,2-p,QDR,PCIe2.0,QSFP,PBF
QLOGIC QLE2562 2-port 8Gb Fibre Channel PCI-E | | HDD Module | CSE-M28SAB-OEM | - | SAS Mobile Rack CSE-M28SAB w/o fan module | | Cable | CBL-0281L | - | IPASS TO IPASS 75CM PBF | | Cable | CBL-0333L | - | 6+2pin GPU power extension from MB GPU 8pin, 40cm |
|
|
|
|
|
 |
|
 |
|
Key Features
1. Highest Density 5U 8-Way Server;
Super-High Computing Performance2. 8x Intel® Xeon® 8-core 7500^
series and 10-core E7-8800 family
processors supported3. 64x DIMM slots support up to
2TB Reg. DDR3 ECC SDRAM**4. 4x PCI-E 2.0 x16 + 2x PCI-E 2.0 x8
(in x16 slot) or 10x PCI-E 2.0 x8
full-height full-length slots5. Dual Gigabit Ethernet LAN ports6. 16x 2.5" HDDs and 2x 5.25" devices;
up to 24x 2.5" HDDs with optional
HDD module***7. 6x SATA2 ports onboard8. Onboard BMC supports IPMI 2.0 +
KVM with dedicated LAN9. 6x 9cm Hot-swap cooling fans10. 2800W hot-swap (2+2) redundant
high-efficiency power supplies
Gold Level Certified
|
|
|
|
|
|
|