 |
 |
 |
|
 |
|
MBD-H8QGL-6F |
- H8QGL-6F (Standard Retail
Pack)
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
- 16.48" x 13" (41.9cm x
33.0cm)
|
| |
|
|
|
CPU |
- Quad 1944-pin Socket G34
- Supports up to four
16/12/8/4-Core ready AMD Opteron™ 6000
Series processors
- HT3.0 Link support
|
| Chipset |
- Dual AMD SR5690 and SP5100
|
| |
|
|
|
Memory Capacity |
- 16 DIMM sockets
- Supprots up to 512GB
Registered ECC or 128GB Unbuffered
ECC/non-ECC DDR3 1866/1600/1333/1066 SDRAM
in 16 DIMMs
- Quad channel memory bus
-
See Detailed Memory Support Matrix
|
|
Memory Type |
- DDR3 1866/1600/1333/1066
MHz Registered ECC SDRAM or Unbuffered
ECC/non-ECC 72-bit, 240-pin gold-plated
DIMMs
|
|
DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB,
32GB
|
|
Memory Voltage |
|
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| |
|
|
|
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
|
SAS |
- LSI 2008 8 port SAS
controller
- RAID 0, 1, 10; RAID 5
Optional
- Optional:
AOC-SAS2-RAID5-KEY
RAID 5 support
|
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- IPMI 2.0 with virtual media
over LAN and KVM over LAN support
- Winbond® WPCM+450 BMC
|
|
Network Controllers |
- Intel® 82576 dual-port
Gigabit Ethernet LAN
- 10/100/1000BASE-T support
|
|
VGA |
|
|
Super I/O |
|
| |
|
|
|
SATA |
|
|
SAS |
- Integrated LSI 2008 SAS2
Controller
- Eight Serial Attached SCSI
(SAS) ports
|
|
LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN
supports IPMI
|
|
USB |
- 7x USB 2.0 ports
- 2x Rear, 2x header-4x
ports, and 1x TypeA
|
|
VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
|
Serial Ports |
- 1x Fast UART 16550 serial
port
- 1x serial port header
|
|
Others |
- 1 SATA DOM power connector,
TPM header
|
| |
|
|
|
PCI-E/PCI |
- 3 PCI-E 2.0 x16
- 2 PCI-E 2.0 x8 (in x16
slots)
- 1 PCI-E 2.0 x4 (in x16
slot)
|
|
 |
|
|
|
|
|
1U Chassis |
- CSE-818TQ-1400B
Requires rev. K
chassis, air shroud MCP-310-81808-0B*
|
|
2U Chassis |
-
CSE-828TQ+-R1400LPB
Requires rev. K
chassis, air shroud MCP-310-82801-0N*
- CSE-828TQ+-R1K43LPB
Requires rev. K
chassis, air shroud MCP-310-82801-0N*
|
|
Tower / 4U Rackmount |
|
|
Note |
- * Sold separately, please
refer to the chassis web spec for the air
shroud info in the optional part list.
|
| |
|
|
|
BIOS Type |
- 16Mb SPI Flash ROM with
AMI® BIOS
|
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard Support
- SMBIOS 2.3
- Real Time Clock Wakeup
|
| |
|
|
|
Software |
|
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
|
| |
|
|
|
CPU |
- Monitors CPU Core Voltages,
+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT,
HT, memory, chipset
- CPU switching voltage
regulator
|
|
FAN |
- Up to 9-fan status
tachometer monitoring
- Up to nine 4-pin fan
headers
- Status monitor for speed &
on/off control
- 3-pin fan support (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM)
fan connectors
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- Thermal control for 9x Fan
connectors
- I2C Temperature
Sensing Logic
|
|
LED |
- CPU / System Overheat
- Suspend-state indicator
- +5V Standby Alert
- UID/Remote UID
|
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
| |
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
|
H8QGL-6F |
MBD-H8QGL-6F -O |
1 |
H8QGL-6F
Motherboard |
| I/O Cable 1 |
CBL-0044L |
8 |
57.5CM SATA FLAT S-S
PBF |
| I/O Cable 2 |
CBL-010L |
1 |
9 PIN SERIAL PORT DTK
CABLE, LF |
| Driver Disk |
CDR-APLUS2 |
1 |
DRIVER CD FOR AMD
SP5100 CHIPSET MB |
| I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD FOR X8,
H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
|
|
|
| |
|
|
|
 |
|
 |
|
Key Features
1. Four AMD Opteron™ 6000 series
(6300 ready) processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link
support
2. Dual AMD SR5690 + SP5100 Chipset
3. Up to 512GB DDR3 1866MHz ECC
Registered DIMM; 16x DIMM sockets
4. Intel 82576 Dual-Port Gigabit Ethernet
LAN
5. LSI 2008 8-Port 6 Gbps SAS
Controller; RAID 0, 1, 10; RAID 5
optional
6. 6x SATA2 (3.0 Gbps) ports via AMD
SP5100 Controller; RAID 0, 1, 10
7. Expansion slot:
3 PCI-E 2.0 x16
2 PCI-E 2.0 x8 (in x16 slots)
1 PCI-E 2.0 x4 (in x16 slot)
8. Integrated Matrox G200eW Graphics
9. Integrated IPMI 2.0 with Dedicated
LAN
|
|
|
|
|
|
|