Supermicro FatTwin 4U SYS-F627R3-FTPT+ Server Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600 IPMI 2.0 2x 3.5" Hot-swap SATA HDDs 1280W Redundant Power Supplies Full Warranty

Home >

Supermicro FatTwin 4U F627R3-FTPT+ Super Server

Alternative Views:

Price: $6,942.99

Membership Price (5% off): $6,595.84

Qty:

Key Features

Technical Specs

Extended Information

Product SKUs

SYS-F627R3-FTPT+

SuperServer F627R3-FTPT+ (Black)

Motherboard

Super X9DRFF-iT+

Processor/Cache

CPU	Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 135W TDP ) Please contact your Supermicro sales representative for additional details Note † BIOS version 3.0 or above is required
Cache	Up to 30MB
System Bus	QPI up to 8 GT/s

System Memory

Memory Capacity	16x 240-pin DDR3 DIMM sockets Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset	Intel® C602 Chipset
AHCI SATA	SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	ntel® X540 Dual Port 10GBase-T Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics	Matrox G200eW

Input / Output

AHCI SATA	2 SATA 3.0 ports (6Gbps)
LAN	2x RJ45 10GBase-T ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 2.0 ports
VGA	1x VGA Port
Serial Port / Header	1x Fast UART 16550 port / 1 Header

System BIOS

BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI

Chassis

Form Factor	4U Rackmount
Model	CSE-F424AL-R1K28B

Dimensions

Height	6.96" (177mm)
Width	17.63" (448mm)
Depth	29" (737mm)
Weight	Net Weight: 105 lbs (47.63 kg) Gross Weight: 150 lbs (68.04 kg)
Available Colors	Black

Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED Power fail LED

Expansion Slots

PCI-Express

1x PCI-E 3.0 x16 (LP)
1x PCI-E 3.0 x8 (LP)
1x PCI-E 2.0 x4 (LP)

Drive Bays

Hot-swap

2x 3.5" Hot-swap SATA HDD trays

Backplane

1x SAS2 / SATA backplane

System Cooling

Fans	8x 8cm heavy duty fans with air shroud and PWM fan speed control

Power Supply

	1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input	1000W Output @ 100-140V, 12-8A, 50-60Hz 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output	1000W: +12V/83A; +5Vsb/4A 1280W: +12V/106.7A, +5Vsb/4A
Certification	80 Plus Platinum

Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Key Features

Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM sockets
1 PCI-E 3.0 x16 (LP), 1 PCI-E 3.0 x8 (LP) and 1 PCI-E 2.0 x4 (LP)
Front I/O ports: Dual 10GBase-T, 2 USB 2.0, and 1 VGA connector
Built-in Server management tool (IPMI 2.0, KVM/media over LAN) with dedicated LAN port
2x 3.5" Hot-swap SATA HDDs
1280W Redundant Power Supplies Platinum Level (95%)