 |
 |
 |
 |
New Page 1
 |
MBD-H8DGi-F |
- H8DGi-F (Standard Retail
Pack)
|
|
 |
Form Factor |
|
Dimensions |
- 12" x 13 " (30.5cm x
33.2cm)
|
|
 |
CPU |
- Dual 1944-pin Socket G34
- Supports up to two
16/12/8/4-Core ready AMD Opteron™ 6000
Series processors
- HT3.0 Link support
|
Chipset |
- Dual AMD chipset
SR5690/SP5100
|
|
 |
Memory Capacity |
- 16 DIMM sockets
- Supports up to 512GB
Registered ECC or 128GB Unbuffered
ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16
DIMMs
- Quad channel memory bus
- For Dual CPUs: Recommended
that memory be populated equally in adjacent
memory banks
-
See Detailed Memory Support Matrix
|
Memory Type |
- DDR3 1600/1333/1066 MHz
Registered ECC or unbuffered ECC / non-ECC
SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB,
32GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
|
 |
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- IPMI 2.0 with virtual media
over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Intel® 82576 controller,
Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA |
|
Super I/O |
|
|
 |
SATA |
|
LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN
supports IPMI
|
USB |
- 8x USB 2.0 ports
- 2x Rear and 2x header (4
ports), 2x Type A
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse
ports
|
Serial Ports |
- 1x Fast UART 16550 serial
port
- 1x serial port header
|
Others |
- 1 SATA DOM power connector,
TPM header
|
|
 |
PCI-Express |
- 3 PCI-E 2.0 x16
- 1 PCI-E 2.0 x8
- 2 PCI-E 2.0 x4 (in x8
slots)
|
|
 |
 |
 |
Tower / 4U Rackmount |
|
|
 |
BIOS Type |
- 16Mb SPI Flash ROM with
AMI® BIOS
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
|
 |
Software |
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
|
|
 |
CPU |
- Monitors CPU Core Voltages,
+1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT,
HT, memory, chipset
- CPU switching voltage
regulator
|
FAN |
- Up to 8-fan status
tachometer monitoring
- Up to eight 4-pin fan
headers
- Status monitor for speed
control
- 3-pin fan support (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM)
fan connectors
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan
connectors
- I2C Temperature
Sensing Logic
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
 |
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
|
 |
FCC |
- Passed to meet FCC standard
requirement
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
Part Number |
Qty |
Description |
H8DGi-F |
MBD-H8DGi-F -O |
1 |
H8DGi-F
Motherboard |
I/O Cable 1 |
CBL-0044L |
6 |
57.5CM SATA FLAT S-S
PBF |
I/O Cable 2 |
CBL-0083L |
1 |
15.7" USB 2.0 2-PORT
W/KEY |
I/O Cable 3 |
CBL-010L |
1 |
9 PIN SERIAL PORT DTK
CABLE, LF |
Driver Disk |
CDR-APLUS2 |
1 |
DRIVER CD FOR AMD
SP5100 CHIPSET MB |
I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD FOR X8,
H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
|
|
|
|
|
 |
 |
 |
 |
 |
Key Features
New Page 1
1. Dual AMD Opteron™ 6000 series
(6300 ready) processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link
support
2. Dual AMD SR5690 / SP5100 Chipset
3. Up to 512GB DDR3 1600MHz ECC
Registered DIMM; 16x DIMM sockets
4. 3.2GHz HyperTransport (HT3) Link
5. Expansion slot:
3 PCI-E 2.0 x16
1 PCI-E 2.0 x8
2 PCI-E 2.0 x4 (in x8 slots)
6. 6x SATA (3.0 Gb/s) ports + Intel 82576
dual-port Gigabit Ethernet LAN
7. Integrated IPMI 2.0 + KVM with dedicated
LAN
8. Matrox G200eW Graphics
9. 8x USB 2.0 ports (2x rear, 4x header,
2x Type A)
10. 8x 4-pin PWM Fan & Speed control
11. 12" x 13", 2U, 3U, 4U and above Server;
E-ATX form factor
|
|
 |
 |
 |
 |

|