 |
 |
 |
 |
|
 | SYS-7045W-NTR+ | - SuperServer 7045W-NTR+ (Beige)
| SYS-7045W-NTR+B | - SuperServer 7045W-NTR+B (Black)
|
| |
 | CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor 5400/5300LV sequence (Harpertown /Clovertown processor) up to 3.20 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100LV sequence (Wolfdale/Woodcrest processor)up to 3.40 GHz
| System Bus | - 1600 / 1333 / 1066 MHz system bus
|
| |
 | Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 128 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
| Memory Type | - 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 512 MB, 1GB, 2GB, 4GB , 8GB**
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
 | Chipset | - Intel® 5400 (Seaburg) chipset
- ESB2
| SATA | - Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Wondows only)
| IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
- For Dedicated LAN, cable CBL-0177L must be used (cable sold separately)
| Network Controllers | - Intel® 82575 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
| Graphics | - ATI ES1000 controller with 32 MB of video memory
| Super I/O | |
| |
 | PCI-Express | - 3 (x8) PCI-e slots (2 w/ Gen 2.0)
- 1 (x4) PCI-e slot
| PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
| UIO | |
| |
 | Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
| LAN | | USB | - 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Serial header
|
| |
 | BIOS Type | - 8Mb Flash EEPROM with Phoenix® BIOS
- EFI BIOS Support
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|  |  | |
 | Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
| Model | |
| |
 | Height | | Width | | Depth | | Gross Weight | | Available Colors | |
| |
 | Buttons | - Power On/Off button
- System Reset button
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power Fail LED
| Ports | |
| |
 | Hot-swap | - 8x Hot-swap Drive Bays
- Supports up to 6x SATA Hard Drives
| Peripheral Bay(s) | - 3x 5.25" Peripheral Drive Bays
|
| |
 | SAS / SATA Backplane w/ Enclosure Management |
| |
 | Fans | - 3x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
| Shroud | |
| |
 | 800W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC | AC Voltage | - 100 - 240V, 50-60Hz, 10-4 Amp
| +5V standby | | +12V | | With Power Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
| |
 | CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| FAN | - Total of eight fan headers supporting up to 8 fans
- Four 4-pin fan headers
- Four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Support 3-pin fans
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
| LED | - CPU / System Overheat LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
RoHS
|
 | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
 | | Part Number | Qty | Description | Motherboard / Chassis | MBD-X7DWN+-O CSE-745TQ-R800(B) | 1 1 | Super X7DWN+ Motherboard 4U SC745TQ-R800 Chassis (B = Black) | Backplane | CSE-SAS-743TQ | 1 | 743 SAS BACKPLANE W/AMI MG9072 | Cable 1 | CBL-0051L | 1 | ROUND FLOPPY CABLE 60CM FOR 5013S, LF. 28AWG | Cable 2 | CBL-0061L | 6 | 35CM, SATA CABLE, PB FREE, 26AWG, flat | Cable 3 | CBL-0139L | 1 | IDE 80-WIRE CABLE FOR DVD ROM, 50 CM, 30AWG | Cable 4 | CBL-0157L | 2 | 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF | CD | CDR-X7 | 1 | FOR X7 SERIES MB | |
Heatsink / Retention | SNK-P0025P | 2 | DEMPSEY 2U PASSIVE PIPE SOLUTION | Power Supply | PWS-801-1R | 2 | 800W,1U,12V OUTPUT POWER SUPPLY | |
Bezel Filter | - | 1 | Front Bezel Filter | Drive Tray(s) | CSE-PT17(B) | 8 | Hot-swappable Hard Drive Tray | I/O Shield | CSE-PT55L | 1 | I/O Shield | Air Shroud | CSE-PT0110 | 1 | Air Shroud |
|
|  |  | |
 | | Part Number | Qty | Description | IPMI | AOC-SIMSO AOC-SIMSO+ | - - | IPMI 2.0 w/ Virtual Media Over LAN IPMI 2.0 w/ Virtual Media + KVM Over LAN | Mounting Rails | CSE-PT26 | - | Chassis Mounting Rails |
|
|
|
|
 |
 |
 |
 |
 |
Key Features
1. Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1600 / 1333 / 1066 MHz FSB2. Up to 128GB DDR2 800 / 667 / 533 SDRAM Fully Buffered DIMM (FB-DIMM)3. 3 (x8) PCI-Express (2 w/ Gen 2.0), 1 (x4) PCI-Express, 2x 64-bit 133MHz PCI-X, 1 UIO slots 4. Intel® 82575EB Dual-port Gigabit Ethernet Controller5. 8 x 3.5" Hot-swap Drives Trays 6x SATA Hard Drives Supported6. 800W Redundant Power Supplies7. Tower or Rackmount
|
|
 |
 |
 |
 |

|