|
|
|
|
|
| SYS-7046GT-TRF | - SuperServer 7046GT-TRF (Black)
|
| |
| CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
- Intel®
Xeon®Processor 5600 Series (Westmere) - Intel®
Xeon®Processor 5500 Series (Nehalem-EP)
| QPI | |
GPU | - Supports 4x Nvidia Fermi C2050, C2070, or C2075 GPU Cards
|
| |
| Memory Capacity | - 12x 240-pin DIMM sockets
- Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
| Memory Type | - 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | - 1GB, 2GB, 4GB , 8GB , 16GB
| Memory Voltage | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
| Chipset | - Dual Intel® 5520 (Tylersburg) chipset
- ICH10R
| SATA | - Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
| Network Controllers | - Intel® Dual 82574L Gigabit Ethernet
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Graphics | | Super I/O | |
| |
| PCI-Express | - 4 (x16) PCI-E 2.0 slots
- 2 (x4) PCI-E 2.0 (in x16 slots)
- 1 (x4) PCI-E (in x8 slot)
| PCI | |
| |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
| LAN | | USB | - 4x USB rear ports
- 2x USB on-board
- 1x USB internal header - 2 ports
- Total 8 USB 2.0 Compliant
| VGA | | Keyboard / Mouse | - PS/2 keyboard and mouse ports
| Serial Port / Header | - 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
| |
| BIOS Type | - 32Mb SPI Flash EEPROM with AMI® BIOS
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| | | |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
| Model | |
| |
| Height | | Width | | Depth | | Gross Weight | | Package | | Available Color | |
| |
| Buttons | - LED Power On/Off button
- System Reset button
| LEDs | - Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
| Ports | |
| |
| Hot-swap | - 8x 3.5" Hot-swap SAS/SATA Drive Bays
- Supports up to 6 SATA Drives
| Peripheral Bay(s) | - 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
| |
| SAS / SATA Hard Drive Backplane with SES2 |
| | |
| Fans | - 4x 5000 RPM Hot-swap Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust Fan
|
| |
| 1400W high-efficiency (1+1) redundant power supply with PMBus | AC Input | - 1100W Output @ 100-140V, 13.5-9.5A, 50-60Hz
- 1400W Output @ 180-240V, 9.5-7.0A, 50-60Hz
| DC Output | - 1100W: +12V/92A; +5Vsb/4A
- 1400W: +12V/116A; +5Vsb/4A
| With Distributor | - +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
| Certification | Gold Certified [ Test Report ] |
Note: Does not support redundancy for 100-140Vac, will need two 1200W modules to operate. | |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
| FAN | - Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
RoHS
| | Environmental Spec. | - Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
| | Part Number | Qty | Description | Motherboard / Chassis | MBD-X8DTG-QF CSE-747TQ-R1400B | 1 1 | Super X8DTG-QF Motherboard 4U Chassis | Backplane | BPN-SAS-747TQ-O-P | 1 | 4u, SAS Backplane,x8 3.5 | Cable 1 | CBL-0061L | 6 | 35CM, SATA CABLE, PB FREE, 26AWG, flat | Cable 2 | CBL-0157L | 2 | 8 pin to 8 pin ribbon SGPIO cable with tube , 40cm, PBF | CD | CDR-X8 | 1 | For X8 series | |
Heatsink / Retention | SNK-P0035AP4 | 2 | 4U+ ACTIVE CPU HS FOR SC733 AND SC735 | Power Supply | PWS-1K41P-1R | 2 | 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3 | |
Bezel Filter | - | 1 | Front Bezel Filter | Drive Tray(s) | MCP-220-97301-0B | 8 | Hot-swappable Hard Drive Tray | I/O Shield | MCP-260-00025-0N | 1 | I/O Shield |
|
| | | |
| | Part Number | Qty | Description | Mounting Rails | MCP-290-00059-0B | - | 26.5" to 36.4" rail set + handles, Quick Release for 4U 17.2"W tower |
|
|
|
|
|
|
|
|
|
Key Features
1. Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s2. Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM3. 4 (x16) PCI-E 2.0, 2 (x4) PCI-E 2.0 (in x16 slots), 1 (x4) PCI-E (in x8 slot), 2x PCI 33MHz slots4. Intel® Dual 82574L Gigabit Ethernet5. 8 x 3.5" Hot-swap Drives Trays Supports up to 6 SATA Drives6. 1400W Gold Level Redundant Power Supply7. Tower or Rackmount8. Supports 4x Nvidia Fermi C2050, C2070, or C2075 GPU Cards
|
|
|
|
|
|
|