 |
 |
 |
|
|
SYS-8046B-TRLF
|
SuperServer 8046B-TRLF (Black)
|
|
CPU
|
Quad 1567-pin LGA Sockets
Supports up to four Intel® Xeon® 64-bit processor(s) of the same type below:
Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX)
|
|
QPI
|
up to 6.4 GT/s
|
|
Memory Capacity
|
32x 240-pin DIMM sockets
Supports up to 1024 GB DDR3 ECC reg. memory at 1066/978/800MHz speed
Memory Mirroring supported
|
|
Memory Type
|
1333*/1066/800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes
|
1GB, 2GB, 4GB , 8GB , 32GB**
|
|
Memory Voltage
|
1.5 V, 1.35V**
|
|
Error Detection
|
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
Chipset
|
Intel® 7500 (Boxboro-EX) chipset
ICH10R
|
|
SATA
|
Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5 support (Windows)
RAID 0, 1 support (Linux)
|
|
IPMI
|
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
|
|
Network Controllers
|
Intel® 82576 Dual-Port Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
|
|
Graphics
|
Matrox G200eW 16 MB DDR2
|
|
Super I/O
|
Winbond 83527HB chip
|
|
LAN
|
2x RJ45 LAN ports
1x dedicated LAN port for IPMI
|
|
USB
|
2x USB rear ports
2x USB internal headers (3 ports)
Total 5 USB 2.0 Compliant
|
|
VGA
|
1x VGA Port
|
|
Serial Port / Header
|
1 Fast UART 16550 serial port
1 Fast UART 16550 serial header
|
|
BIOS Type
|
32Mb SPI Flash EEPROM with AMI® BIOS
|
|
8Mb Flash EEPROM with AMI ® BIOS
|
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
|
|
Form Factor
|
Tower / 4U Rackmountable
Optional Rackmount Kit
(MCP-290-00059-0B)
|
|
Model
|
CSE-748TQ-R1400B
|
|
Height
|
17.8" (452mm)
|
|
Width
|
7.0" (178mm)
|
|
Depth
|
28.4" (721mm)
|
|
Weight
|
Net Weight: 65.5 lbs (29.7 kg)
Gross Weight: 86.0 lbs (39.0 kg)
|
|
Available Colors
|
Black
|
|
PCI-Express
|
Auto-switch for 2 (x16) PCI-E 2.0 or
1 (x16) PCI-E 2.0 + 1 (x8) PCI-E 2.0
+ 2 (x4) PCI-E 2.0 or
3 (x8) PCI-E 2.0 + 2 (x4) PCI-E 2.0 slots
|
|
Hot-swap
|
5x 3.5" SAS / SATA Hard Drives
Additional three 3.5" SAS/SATA Hard Drives available with optional M35 Mobile Rack
|
|
Peripheral Bay(s)
|
3x 5.25" Peripheral Drive Bays
|
|
SAS/SATA HDD Backplane
|
(SAS support requires optional SAS controller)
|
|
Fans
|
3x 80mm RPM Hot-Swappable Cooling Fans
3x 80mm RPM Hot-Swappable Rear Exhaust Fan
|
|
Shrouds
|
1x Air Shroud
|
|
|
Redundant 1400W high-efficiency power supply with PMBus
|
|
AC Input
|
1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
|
|
DC Output
+5V standby
|
6 Amp
|
|
DC Output
+12V
|
100 Amp @ 100-140V
117 Amp @ 180-240V
|
|
With Power Distributor
|
+5V: 30 Amp
+3.3V: 25 Amp
-12V: 0.6 Amp
|
|
Certification
|
80 Plus Gold Certified
|
|
CPU
|
Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages.
4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
|
|
FAN
|
10x 4-pin fan headers with tachometer status monitoring
Low noise fan speed control mode
|
|
Temperature
|
Monitoring for CPU and system environment
Thermal Control for 10x fan connectors
|
|
Other Features
|
Chassis intrusion detection
|
|
Operating Environment / Compliance
|
|
RoHS
|
RoHS Compliant
|
|
Environmental Spec.
|
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
|
Part Number
|
QTY
|
Description
|
|
Motherboard
|
MBD-X8QBE-LF
|
1
|
Super X8QBE-LF Motherboard
|
|
Chassis
|
CSE-748TS-R1400BP
|
1
|
SC748 4U Chassis
|
|
Backplane
|
CSE-SAS-M35TQ
|
1
|
CSE-SAS-M35TQ-O-P
|
|
Cable 1
|
CBL-0044L
|
5
|
SATA CABLE 61CM FLAT S-S PBF. 26AWG flat
|
|
Cable 2
|
CBL-0157L-01
|
2
|
8 pin to 8 pin ribbon SGPIO cable with tube, 61.5cm, PBF
|
|
CD
|
CDR-INTC-Q
|
1
|
Driver for Intel quad MBs
|
|
Heatsink / Retention
|
SNK-P0045P
|
4
|
2U Passive CPU Heatsink for X8QBE/6
|
|
Power Supply
|
PWS-1K41F-1R
|
2
|
1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM
|
|
|
Part Number
|
QTY
|
Description
|
|
Cable
|
CBL-0420L
|
-
|
27" BBU extension to LSI iBBU07
|
|
Mounting Rails
|
MCP-290-00059-0B
|
-
|
26.5" to 36.4" rail set + handles,
Quick Release for 4U 17.2"W tower
|
|
Mobile Rack
|
CSE-M35T-1/CSE-M35TQ
|
-
|
Mobile Rack
|
|
|
|
 |
|
 |
|
Key Features
- Quad Intel® Xeon® processor 7500
series (8-Core) or new gen. Intel®
Xeon® processors E7-4800 family
(10-Core), with QPI up to 6.4 GT/s
- Up to 1TB DDR3 ECC Reg. DIMM
- Auto-switch for: 2 (x16) PCI-E 2.0 or
1 (x16) PCI-E 2.0 + 1 (x8) PCI-E 2.0
+ 2 (x4) PCI-E 2.0 or
3 (x8) PCI-E 2.0 + 2 (x4) PCI-E slots
- Intel® 82576 Dual-Port Gigabit
Ethernet Controller
- 5 Total Hot-swap Drive Bays:
5x SAS/SATA Drives Support
- 1400W Gold Level Redundant
High-efficiency Power Supplies
- Integrated IPMI 2.0 with Dedicated LAN
|
|
|
|
|
|
|