 |
MBD-H8DGU-F |
|
|
 |
Form
Factor |
|
Dimensions |
- 12.1" x 13" (30.7cm x 33.2cm)
|
|
 |
CPU |
- Dual 1944-pin Socket G34
- Supports up to two 16/12/8/4-Core
ready AMD Opteron™ 6000 Series processors
- HT3.0 Link support
|
Chipset |
- AMD chipset SR5670 + SP5100
|
|
 |
Memory
Capacity |
- 16 DIMM sockets
- Supports up to 512GB Registered ECC or
128GB Unbuffered ECC/non-ECC 1600/1333/1066 SDRAM in 16
DIMMs
- Quad channel memory bus
- For Dual CPUs: Recommended that memory be
populated equally in adjacent memory banks
-
See Detailed Memory Support Matrix
|
Memory
Type |
- DDR3 1600/1333/1066 MHz Registered ECC
Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated
DIMMs
|
DIMM
Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB, 32GB
|
Memory
Voltage |
|
Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
|
|
 |
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM over LAN support
- Winbond® WPCM450 BMC
|
Network Controllers |
- Intel® 82576 controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
VGA |
|
Super
I/O |
|
|
 |
SATA |
|
LAN |
- 2 RJ45 LAN ports
- 1x RJ45 Dedicated LAN supports IPMI
|
USB |
- 7x USB 2.0 ports
- 2x Rear, 2x header(4 ports), 1x Type A
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial
Ports |
- 1 Fast UART 16550 serial port
- 1 serial port header
|
Others |
- 1 UID, 1 SATA DOM power connector, TPM
header
|
|
 |
PCI-Express (Gen 2.0) |
- 1U Left Slot:
1 PCI-E 2.0 x16 and UIO or
2 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 or
1 PCI-E 2.0 x8 and UIO
- 2U Left Slot:
2 PCI-E 2.0 x8 and UIO or
3 PCI-E 2.0 x8 or
1 PCI-E 2.0 x16 and UIO
(See Optional Part List)
|
|
 |
 |
 |
1U
Chassis |
|
2U
Chassis |
|
|
 |
 |
Server
SKUs |
|
|
 |
BIOS
Type |
- 16Mb Flash EEPROM with AMI® BIOS
|
BIOS
Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus Protection
- SMBIOS 2.3
|
|
 |
Software |
|
Power
Configurations |
- ACPI Power Management
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss
recovery
|
|
 |
CPU |
- Monitors CPU Core Voltages, +3.3V, +5V,
±12V, HyperTransport Link voltage, memory voltage, VBAT,
Chipset voltage
- CPU switching voltage regulator
|
FAN |
- Total up to 8-fan status tachometer
monitoring
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- Thermal Control for 8x Fan Connectors
- I2C Temperature Sensing Logic
|
LED |
- CPU / System Overheat LED
- Suspend-State Indicator LED
- +5V Standby Alert LED
- UID/Remote LED
|
Other
Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
 |
RoHS
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
 |
FCC |
- Passed to meet FCC standard requirement
|
|