Supermicro MBD-H8QIi+-F Quad 1207-pin Socket F Dual Port GbE LAN IPMI 2.0 Dedicated Lan 6 SATA2 ports via AMD SP5100 Controller Full Warranty

Home > Motherboard >

Market Price $649.95

Product Code: MBD-H8QIIPLUS-F

Qty:

Description

Technical Specs

Supermicro MBD-H8QIi+-F Quad 1207-pin Socket F Dual Port GbE LAN IPMI 2.0 Dedicated Lan 6 SATA2 ports via AMD SP5100 Controller Full Warranty

New Page 1


Processor/Chipset

CPU	Quad 1207-pin Socket F Supports up to four Six-Core / Quad-Core AMD Opteron™ 8000 Series processors** HT3.0 Link support
Chipset	AMD SR5690 + SP5100 Chipset


System Memory

Memory Capacity	Sixteen 240-pin DIMM sockets Support up to 128GB memory Dual channel memory bus; Single or Dual (recommended) channel memory support For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type	DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage	1.8V only


On-Board Devices

SATA	AMD SP5100 (RAID 0, 1, 10)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC
Network Controllers	Intel® 82576 controller, Dual-Port Gigabit Ethernet 10/100/1000BASE-T support
VGA	Matrox G200eW 16MB DDR2 graphics
Super I/O	Winbond® 83627DHG chip


Input / Output

SATA	6x SATA2.0 (3Gb/s) Ports
IDE	Single EIDE channel support up to two UDMA IDE devices Supports UDMA Mode 5 Supports PIO Mode 4 Supports ATA 100/133
LAN	2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI
USB	6x USB 2.0 ports 2x Rear / 2x header / 2x type A
VGA	1x VGA port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Ports	1x Fast UART 16550 serial port 1x serial port header
Others	1 SATA DOM power connector


System BIOS

BIOS Type	16Mb SPI Flash ROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3


Management

Software	IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III
Power Configurations	ACPI Power Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery


PC Health Monitoring

CPU	Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator
FAN	Up to 9-fan status tachometer monitoring Up to nine 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support I²C Temperature Sensing Logic
LED	CPU / System Overheat LED +5V Standby Alert LED
Other Features	Chassis Intrusion Detection Chassis Intrusion Header


Operating Environment / Compliance

RoHS	RoHS Compliant 5/6, Server Exemption
Environmental Specifications	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)