 |
 |
 |
|
|
 |
| MBD-PDSBM-LN2+-O |
- PDSBM-LN2+ (Standard Retail Pack)
|
| MBD-PDSBM-LN2+-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 9.6" x 9.6 ", (24.4cm x 24.4cm)
|
| |
|
| CPU |
- Single LGA775 ZIF Socket
- Supports a Dual-Core Intel® Xeon® 3000 Series
- Supports an Intel® Core™2 Duo E6000 and E4000 Series
- Supports an Intel® Pentium® E2000 Series
- Supports an Intel® Pentium® D 945, 935, 925, 915
and 820, 805
- Supports an Intel® Pentium® 4 600 and 500 Series
- Supports an Intel® Celeron® E1000 Series
- Supports an Intel® Celeron® 400 Series
- Supports an Intel® Celeron® D 300 Series
- NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
|
| System Bus |
- 1066 / 800 / 667 MHz system bus
|
| |
|
| Memory Capacity |
- Two 240-pin DIMM sockets
- Supports up to 4 GB of unbuffered, non-ECC DDR2 667/533MHz memory (Single / Dual Channel)
|
| Memory Type |
- DDR2 667/533MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2 GB
|
| Memory Voltage |
|
| |
|
| Chipset |
- Intel 946GZ
- ICH7R + Intel® 82573
|
| Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
|
| Network Controllers |
- 2 x Intel® 82573 Gigabit PCI-Express Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Graphics |
- On Chip Intel 946GZ video
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| Serial ATA |
- Four Serial ATA ports ( 3Gbps )
- Four SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 4x USB 2.0 / 1.1 compatible
- 2 in front (FUCI), 2 in rear
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
|
 |
|
|
| 1U |
|
1U
(For Low-Voltage CPU only) |
|
| Important Note |
- Only Supermicro 1U chassis is recommended for 1U Building Block Solutions
|
| |
|
| Universal Slot |
- 1 (x4) (x8 physical) PCI-Express Slot OR
- 1x 32-bit 33MHz PCI Slot
|
| PCI |
- 1x 32-bit 33MHz PCI (5V) slots
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with PhoenixBIOS®
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
|
| Software |
|
| Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Suspend to RAM (STR)
- Power-on mode control for AC power recovery
- Internal / External modem remote ring-on
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Total of five 4-pin fan headers
- 5 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
|
| Other Features |
- Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
| |
|
| |
Part Number |
Qty |
Description |
| PDSBM-LN2+ |
MBD-PDSBM-LN2+-O |
1 |
PDSBM-LN2+ Motherboard |
| Manual(s) |
MNL-0942 |
1 |
Motherboard Manual for PDSBM-LN2+ |
| I/O Cables |
CBL-0022L
CBL-0036L-03
CBL-0044L |
1
1
4 |
ATX Floppy Cable
ATA 66/100 IDE LP Cable
SATA Cable (2Ft.) |
| Driver Disk |
CDR-PD |
1 |
Version 1.30 (or newer) CD |
| I/O Shield |
CSE-PT07L |
1 |
I/O Shield for PDSBM-LN2+ |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Riser Card |
RSC-RR1U-32L
RSC-RR1U-E8 |
-
- |
1U 32-bit PCI Riser Card for PDSML-LN2 (Full height, full length)
1U Universal (SXB-E) Slot to PCI-E Slot Riser Card for PDSML-LN2 | | |
|
|
|
 |
|
 |
|
Key Features
Key Features
1. Intel® Xeon® 3000 Series,
Core™2 Duo, Pentium® D,
Pentium 4 & Celeron D in LGA775
Package (FSB 1066/800/533)
2. Intel® 946GZ Chipset
3. Up to 4GB dual channel unbuffered,
non-ECC DDR2 667/533 SDRAM
4. 2x Intel® 82573 PCI-e Gigabit
LAN Port
5. Built-in SATA2 Controller
4x SATA (3Gbps) Drive Support
6. 1 Universal Slot Supporting:
1 (x4) (x8 physical) PCI-Express OR
1x 32-bit 33MHz PCI slot,
1x 32-bit 33MHz PCI
7. On Chip Intel 946GZ Video
8. 2 rear USB ports + 2 USB headers
9. TPM Support
|
|
|
|
|
|
|