 |
 |
 |
|
|
 |
| MBD-X7DB8-X-O |
- X7DB8-X (Standard Retail Pack)
|
| MBD-X7DB8-X-B |
|
| |
|
| Form Factor |
|
| Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
|
| CPU |
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below: - Quad-Core Intel®
Xeon®Processor
5400/5300
sequence
(Harpertown
/Clovertown processor)
up to 3.16 GHz - Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale
/Woodcrest/Dempsey processor) up to 3.40 GHz
|
| System Bus |
- 1333 / 1066 / 667 MHz system bus
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
|
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Mirroring supported
|
| Memory Type |
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
- Intel® 5000P (Blackford) chipset
- MCH + Two PXH + ESB2
|
| SATA |
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| SCSI |
- Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI (Host RAID only supports 4 drives)
- Host RAID 0, 1, & 10 support
|
| RAID |
- Support for Zero-Channel RAID
- Optional: (Card not included)
- RAID 0, 1, 5, 10
|
| IPMI |
|
| Network Controllers |
- Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics |
- ATI ES1000 controller with 16 MB of video memory
|
| Super I/O |
|
| |
|
| Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Compact Flash (40-pin connector, IDE 1, single channel) slot
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal headers
- Total 5 USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
|
 |
|
|
| 2U Chassis |
- CSE-825S2-R700LP
- CSE-825S2-560LP
- CSE-825S2-560RC
- CSE-825S2-R700RC
- CSE-823S-550LP
|
| 3U Chassis |
|
| Tower / 4U Rackmount |
|
| Important Chassis Notes |
- To ensure system stability, a 500W (minimum) ATX power supply
[4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
|
| PCI-X |
- 3x 64-bit 133MHz PCI-X (3.3V) slots
- 3x 64-bit 100MHz PCI-X (3.3V) slots
|
| |
|
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
|
| Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
| |
|
| Voltage |
- Monitors for CPU Cores, +3.3V, +5V, ±12V, +5V Standby
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of four 3-pin and four 4-pin fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature: 10° to 35°C (50° to 95°F)
- Non-operating Temperature: -40° to 70°C (-40° to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
| |
Part Number |
Qty |
Description |
| X7DB8-X |
MBD-X7DB8-X
-O |
1 |
X7DB8-X
Motherboard |
| I/O Cable 1 | CBL-0044L |
4 |
57.5CM SATA FLAT S-S PBF |
| I/O Cable 2 | CBL-0083L |
1 |
15.7" USB 2.0 2-PORT W/KEY |
| I/O Cable 3 | CBL-010L |
1 |
9 PIN SERIAL PORT DTK CABLE, LF |
| I/O Cable 4 | CBL-022L |
1 |
ATX FLOPPY CABLE 3 HEADERS PB FREE |
| I/O Cable 5 | CBL-034L-U320 |
1 |
LVD U320 5 DROP CBL, PB FREE |
| I/O Cable 6 | CBL-036L-03 |
1 |
18" ATA 133/100/66 3-DROP TPE CABLE, PBF |
| Driver Disk |
CDR-X7 |
1 |
FOR X7 SERIES MB |
| I/O Shield |
CSE-PT7L |
1 |
I/O SHIELD FOR DUAL LAN MOTHERBOARD, PB FREE |
| Manual |
MNL-0669 |
1 |
ULTRA 320 SCSI MANUAL |
| Manual |
MNL-0869 |
1 |
X7DB8-X/X7DBE-X MANUAL |
|
|
|
 |
|
 |
|
Key Features
1. Quad & Dual Core Intel® 64-bit Xeon®
Support,
667 / 1066 / 1333MHz FSB
2. Intel® 5000P (Blackford) Chipset
3. Up to 32GB DDR2 667 & 533 SDRAM
Fully Buffered DIMM (FB-DIMM)
4. Intel® (ESB2/Gilgal) 82563EB Dual-port
Gigabit Ethernet Controller
5. Adaptec AIC-7902 Dual Channel
Ultra320 SCSI
6. 6x SATA 3.0Gbps Ports via ESB2 Controller
SATA Controller
7. 3x 64-bit 133MHz PCI-X,
3x 64-bit 100MHz PCI-X
8. Zero-Channel RAID Support
9. ATI ES1000 Graphics with
16MB video memory
10. LP IPMI 2.0 (SIMLP) Slot
|
|
|
|
|
|
|