Supermicro MBD-X8DT3-F Dual LGA 1366 6 SATA Ports via ICH10R LSI1068E 8 SAS Ports RAID Controller Dual GbE LAN Ports Integrated Matrox G200eW graphics Full Warranty

Home > Motherboard >

Supermicro MBD-X8DT3 Dual LGA 1366 6 SATA Ports via ICH10R LSI1068E 8 SAS Ports RAID Controller Dual GbE LAN Ports Integrated Matrox G200eW graphics Full Warranty

Supermicro MBD-X8DT3-F Dual LGA 1366 6 SATA Ports via ICH10R LSI1068E 8 SAS Ports RAID Controller Dual GbE LAN Ports Integrated Matrox G200eW graphics Full Warranty

Our Price: $633.33

Product Code: MBD-X8DT3

Qty:

Description

Technical Specs

Supermicro MBD-X8DT3 Dual LGA 1366 6 SATA Ports via ICH10R LSI1068E 8 SAS Ports RAID Controller Dual GbE LAN Ports Integrated Matrox G200eW graphics Full Warranty

New Page 1

Product SKUs

MBD-X8DT3	X8DT3 (Bulk Pack)


Physical Stats

Form Factor	Extended ATX
Dimensions	12" x 13" (30.5cm x 33cm)


Processor/Cache

CPU	Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon®Processor 5600 Series (Westmere) Intel® Xeon®Processor 5500 Series (Nehalem-EP)
QPI	up to 6.4 GT/s


System Memory

Memory Capacity	12x 240-pin DIMM sockets Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported
Memory Type	1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage	1.5 V / 1.35V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices

Chipset	Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D
SAS	LSI SAS1068E RAID 0, 1, 10 support (Optional: AOC-IButton68) RAID 5 support
SATA	Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows) RAID 0, 1, 10 support (Linux)
Network Controllers	Intel® 82576 Dual-Port Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization
Graphics	Matrox G200eW
Super I/O	Winbond 83627HG chip


Input / Output

SAS	8 SAS / SATA ports
Serial ATA	Six Serial ATA ports Six SATA hard drives supported
Floppy	1 Floppy controller; 1.44 MB
LAN	2x RJ45 LAN ports
USB	2x USB rear ports 2x USB on-board 4x USB internal headers Total 8 USB 2.0 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	1 Fast UART 16550 serial port 1 Fast UART 16550 serial header (Option)


Chassis ( Optimized for X8DT3 )

1U Chassis	CSE-812L-600CB CSE-815TQ-560CB CSE-815TQ-R700CB
2U Chassis	CSE-825TQ-560LPB CSE-826A-R1200LPB CSE-826E1-R800LPB CSE-826E2-R800LP CSE-826TQ-R800LPB
3U Chassis	CSE-836E1-R800B CSE-836E16-R1200B CSE-836E2-R800B CSE-836E26-R1200B CSE-836TQ-R800B CSE-933E1-R760B CSE-933E2-R760B CSE-933T-R760B CSE-936E1-R900 CSE-936E16-R1200B CSE-936E26-R1200B
Tower / 4U Rackmount	CSE-745TQ-920B CSE-846E1-R900B CSE-846E2-R900 CSE-846TQ-R900B
Important Chassis Notes	To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.


Expansion Slots

PCI-Express	3 (x8) PCI-E 2.0 (1 in x16 slot) 1 (x4) PCI-E slot
PCI	2x 33MHz PCI slots


System BIOS

BIOS Type	32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support


Management

Software	SuperDoctor® III
Power Configurations	ACPI / ACPM Power Management


PC Health Monitoring

Voltage	Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 6-Phase-switching voltage regulator
FAN	Total of eight fan headers supporting up to 8 fans Eight 4-pin fan headers 8x fans with tachometer status monitoring Support 3-pin fans (w/o speed control) Low noise fan speed control (4-pin fan only)
Temperature	Monitoring for CPU and chassis environment Thermal Control for 8x fan connectors PECI
Other Features	Chassis intrusion detection Chassis intrusion header


Operating Environment / Compliance

RoHS	RoHS Compliant 6/6, Pb Free
Environmental Spec.	Operating Temperature: 10° to 35° C (50° to 95°F) Non-operating Temperature: -40° to 70° C (-40° to 158° F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)