 |
 |
 |
|
|
 |
| MBD-X9SCL+-F
-B |
|
| |
|
|
| Form Factor |
uATX |
| Dimensions |
9.6" x 9.6", (24.4cm x 24.4 cm)
|
| |
|
| CPU |
-
Intel® Xeon® processor E3-1200 & v2
series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron
processors
*** *
- Socket H2 (LGA 1155)
|
| |
|
| Memory Capacity |
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- 6x SATA2 (3Gb/s) w/ RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Two Intel® 82574L Gigabit Ethernet Controllers
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
- BMC integrated Matrox G200
|
| Super I/O |
|
| |
|
| Serial ATA |
- 6 SATA 2.0 ports
- 6 SATA hard drives supported
|
| LAN |
- 2x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 9x USB 2.0 ports total
(2x rear + 6x via header + 1x type A)
|
| VGA |
|
| Serial Port / Header |
- 2x Fast UART 16550 serial port
(one header and one rear port)
|
| TPM |
|
|
 |
|
|
| PCI-Express |
- 2 (x8) PCI-E 3.0 in x8 slots***
- 1 (x4) PCI-E 2.0 in x8 slots
|
| |
|
| BIOS Type |
- 32Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI (SMBIOS) 2.7
- ACPI 4.0
- PCI 2.3
- USB Keyboard support
|
| |
|
| Software |
- IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
- SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations |
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- +5V Standby alert LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
|
| |
Part Number |
Qty |
Description |
| X9SCL+-F |
MBD-X9SCL+-F |
1 |
X9SCL+-F Motherboard |
| I/O Cables |
CBL-0044L |
2 |
57.5CM SATA FLAT S-S PBF |
| I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD |
|
|
|
 |
|
 |
|
Key Features
Key Features
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & E3-1200 v2
series, 2nd and 3rd Gen Core i3
processors***, Pentium, Celeron
2. Intel® C202 PCH Chipset
3. Up to 32GB DDR3 ECC 1333MHz /
1600MHz*** UDIMMs in 4 sockets
4. Two Intel® 82574L GbE Controllers,
2x Gigabit Ethernet LAN ports
5. 6x SATA 2.0 with RAID 0, 1, 5, 10
6. 2x (x8) PCI-E 3.0*** in x8 slots and
1x (x4) PCI-E 2.0 in x8 slot
7. 9x USB 2.0 ports
(2 rear + 6 via header + 1 Type-A)
8. Integrated IPMI 2.0 with KVM and
Dedicated LAN
|
|
|
|
|
|
|