| Product SKUs | |
| SYS-5019S-MN4 | SuperServer 5019S-MN4 (Black) |
| Motherboard | |
| Super X11SSH-LN4F | |
| Processor/Cache | |
| CPU | Single Socket H4 (LGA 1151) supports: |
| | Intel® Xeon® processor E3-1200 v6/v5, |
| | Intel® 6th Gen Core™ i3 |
| | CPU TDP up to 80W |
| System Memory | |
| Memory Capacity | 4x 288-pin DDR4 DIMM slots |
| | Up to 64GB DDR4 ECC UDIMM |
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs |
| DIMM Sizes | 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| | Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C236 chipset |
| SATA | SATA3 (6Gbps) via C236 controller |
| | RAID 0, 1, 5, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| | IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| | ASPEED AST2400 BMC |
| Network Controllers | Quad Intel® I210-AT Gigabit Ethernet LAN ports |
| | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Video | ASPEED AST2400 BMC |
| Input / Output | |
| SATA | 4x SATA3 (6Gbps) ports |
| LAN | 4x RJ45 Gigabit Ethernet LAN ports |
| | 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB 3.0 ports (front/rear) |
| | 2x USB 2.0 ports |
| Video | 1x VGA port |
| Serial Port / Header | 2x COM ports (1 rear, 1 header) |
| SuperDOM | 2x SuperDOM (Disk on Module) ports with built-in power |
| PC Health Monitoring | |
| Voltage | Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |
| FAN | Total of 4 fan headers supporting up to 4 fans |
| | 4 fans with tachometer status monitoring |
| | Status monitor for speed control |
| | Status monitor for on/off control |
| | Low noise fan speed control |
| | Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment |
| | CPU thermal trip support |
| | I2C temperature sensing logic |
| | Thermal Monitor 2 (TM2) support |
| | PECI |
| LED | CPU / System Overheat LED |
| | Suspend static indicator LED |
| | UID/Remote UID |
| Other Features | Chassis intrusion detection |
| | Chassis intrusion header |
| | Chipkill support |
| | RoHS, Halogen Free |
| | SMBIOS 2.3 |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: |
| | 10°C to 35°C (50°F to 95°F) |
| | Non-operating Temperature: |
| | -40°C to 70°C (-40°F to 158°F) |
| | Operating Relative Humidity: |
| | 8% to 90% (non-condensing) |
| | Non-operating Relative Humidity: |
| | 5% to 95% (non-condensing) |