Processor/Cache (per Node) |
CPU | Socket FCBGA1667 |
| Intel® Xeon® Processor D-2141I |
| CPU TDP support 65W |
Cores / Cache | 8-Cores, 16 Threads |
System Memory (per node) |
Memory Capacity | 4x 288-pin DDR4 DIMM slots |
| Up to 512 GB ECC LRDIMM |
| Up to 256 GB ECC RDIMM |
Memory Type | 2133MHz ECC DDR4 LRDIMM and RDIMM |
DIMM Sizes | 32GB, 16GB, 8GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
Network Devices (per node) |
Micro-LP NIC | Dual RJ-45 connectors |
| MicroLP Adapter Matrix (Networking options) |
| Intel® i350 GbE LAN controller |
On-Board Devices (per node) |
Chipset | System on Chip (SoC) |
SATA | SATA3 (6Gbps) via SoC |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM over LAN support |
| ASPEED AST2500 BMC |
Graphics | ASPEED AST2500 Graphics (BMC with Graphic controller) |
Input / Output (per node) |
SATA | 2 SATA3 (6Gbps) ports |
LAN | 2 RJ45 Gigabit Ethernet LAN ports |
KVM | 1 VGA, 1 COM and 2 USB 2.0 (with KVM dongle) |
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | USB Keyboard support |
| DMI 2.3 |
| SMBIOS 2.3 |
| ACPI 1.0 / 2.0 |
Management |
Software | Watchdog |
| KVM with dedicated LAN |
| SuperDoctor® 5 |
| Intel® Node Manager |
| IPMI 2.0 |
| SSM , SPM , SUM |
Rear Window (each node) |
Switch | Power / UID |
Chassis |
Form Factor | 3U |
Model | CSE-938NH-R1K68BP |
Dimensions and Weight |
Height | 5.2" (132 mm) |
Width | 15.26" (387 mm) |
Depth | 23" (585 mm) |
Package | 11.65" (H) x 26.26" (W) x 34" (D) |
Weight | Net Weight: 62.2 lbs (28.21 kg) |
| Gross Weight: 88 lbs (39.92 kg) |
Color | Black |
Front Panel |
Buttons | Power On/Off button |
LEDs | Power LED |
| Node status LED |
Expansion Slots (per node) |
PCI-Express | 1 PCI-E 3.0 x16 (Low-profile) slot |
| 1 Micro-LP PCI-E 3.0 x8 slot |
M.2 | M.2 Interface: 2 PCI-E 3.0 x4 |
| M.2 Form Factor: 2280/22110 |
| M.2 Key: M-Key |
Drive Bays (per node) |
Internal | Enterprise SATA HDD only recommended |
| 2x 3.5" SATA3 (6Gbps) HDDs per node (or 2x 2.5" Hybrid SATA3/NVMe with optional kits); up to 16 HDDs total |
System Cooling |
Fans | 4 Hot-swap 8cm cooling fans fan speed control |
Power Supply (76mm Width) |
Power Supply (76mm Width) | 1600W 1U Redundant Power Supplies with PMBus |
Total Output Power | 800W: 100 – 140Vac |
| 1600W: 180 – 240Vac |
Dimension (W x H x L) | 76 x 40.4 x 336 mm |
Input | 100-140Vac / 10-7A / 50-60Hz |
| 180-240Vac / 11-8A / 50-60Hz |
+12V | Max: 67A / Min: 0A (100-140Vac) |
| Max: 133A / Min: 0A (180-240Vac) |
+5Vsb | Max: 1A / Min: 0A |
Output Type | 27 Pairs Gold Finger Connector |
Certification | Titanium Level |
PC Health Monitoring |
CPU | Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. |
| 5 Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN | Cooling zone |
Temperature | Monitoring for CPU and chassis environment |
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |