 |
|
SYS-7047R-72RF |
- SuperServer 7047R-72RF (Black)
|
| |
|
|
| CPU |
- Intel® Xeon® processor E5-2600
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System
Bus |
|
| |
|
|
| Memory
Capacity |
- 16x 240-pin DDR3 DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered
memory (RDIMM)
- Supports up to 192 GB DDR3 ECC Un-Buffered
memory (UDIMM)
|
| Memory
Type |
- 1600/1333/1066/800MHz ECC DDR3 SDRAM
72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC
memory)
|
| |
|
|
|
Chipset |
|
| SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| SAS |
- SAS2 from LSI 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
|
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O
overhead
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video |
- G200 (Nuvoton WPCM450 BMC with graphic
controller)
|
| Super
I/O |
|
| |
|
|
| SATA |
- 2x SATA 3.0 ports (6Gbps)
- 8x SATA 2.0 ports (3Gbps)
|
| SAS |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 7x USB 2.0 ports total
(4 rear + 2 via header + 1 Type A)
|
| Video |
|
| Serial
Port / Header |
|
| |
|
|
| PCI-Express |
- 1 PCI-E 3.0 x16 slot
- 6 PCI-E 3.0 x8 slots
|
| |
|
|
| BIOS
Type |
- 64Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
 |
|
|
|
|
| Form
Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross
Weight |
|
|
Available Colors |
|
| |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| |
|
|
|
Hot-swap |
- 8x Hot-swap 3.5" SAS2/SATA Drive Trays
|
|
Peripheral Bay(s) [90o Rotatable] |
- 2x 5.25" Peripheral Drive Bays
- 1x 5.25" Bay that fits 3.5" bay devices
|
| |
|
|
| SAS / SATA
Hard Drive Backplane w/AMI MG9072 |
| |
|
|
| Fans |
- 3x 5000 RPM Hot-swap PWM Cooling Fans
- 2x 5000 RPM Hot-swap Rear Exhaust PWM Fans
|
| |
|
|
| 920W
high-efficiency (94%+) AC-DC Redundant power supplies with PMBus
and I2C |
| AC
Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC
Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
|
Certification |
 
Platinum Certified
[
Test Report ]
|
| |
|
|
| CPU |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V,
+12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset
Voltages.
- 6-Phase-switching voltage regulator
|
| FAN |
- Total of eight fan headers supporting up to
8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
|
| Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
|
| |
|
|
RoHS
|
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
