 |
 |
 |
|
 |
|
SYS-1027GR-TRF-FM309 |
- SuperServer 1027GR-TRF-FM309 (Black)
|
| |
|
|
| CPU |
- Intel® Xeon® processor E5-2600
(up to 130W TDP)
- Dual Socket R (LGA 2011)
|
| Cache |
|
| System
Bus |
|
| GPU |
- Supports M2090, up to 130W CPU at 30°C
|
| |
|
|
| Memory
Capacity |
- 8x 240-pin DDR3 DIMM sockets
- Supports up to 256 GB DDR3 ECC Registered
memory (RDIMM)
- Supports up to 48 GB DDR3 ECC and non-ECC
UDIMM
|
| Memory
Type |
- 1600/1333/1066MHz ECC DDR3 SDRAM 72-bit,
240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| |
|
|
| GPU |
- 3x NVIDIA Tesla M2090 Fermi GPU cards
|
|
Chipset |
|
| SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
|
| IPMI |
- Support for Intelligent Platform Management
Interface v.2.0
- IPMI 2.0 with virtual media over LAN and
KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O
overhead
- Supports 10GBASE-T, 100GBASE-TX, and
1000BASE-T, RJ45 output
|
|
Graphics |
|
| |
|
|
| SATA |
- 2 SATA 3.0 ports (6Gbps)
- 2 SATA 2.0 ports (3Gbps)
|
| LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
|
| Video |
|
|
Keyboard/Mouse |
- 1 PS/2 Keyboard/Mouse port
|
| Serial
Port |
|
| |
|
|
| BIOS
Type |
- 16Mb SPI Flash EEPROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
|
 |
|
|
|
|
| Form
Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Gross
Weight |
|
|
Available Color |
|
| |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED /
UID LED
|
| |
|
|
|
PCI-Express |
- 3 (x16) PCI-E 3.0 slots (3x NVIDIA Tesla
M2090 Fermi GPU cards integrated)
- 1 (x8) PCI-E 3.0 (in x16) low-profile slot
|
| |
|
|
|
Hot-swap |
- 4x 2.5" Hot-swap drive bays
|
|
|
| |
|
|
| Fans |
- 10x counter-rotating fans with optimal fan
speed control
|
| |
|
|
| 1800W (1+1)
Redundant 1800W power supply with PMBus |
| AC
Input |
- 1000W Output @ 100-120V, 12-10A, 50-60Hz
- 1200W Output @ 120-140V, 12-10A, 50-60Hz
- 1800W Output @ 200-240V, 10-8.5A, 50-60Hz
|
| DC
Output |
- 1000W: +12V/84A; +5Vsb/4A
- 1200W: +12V/100A; +5Vsb/4A
- 1800W: +12V/150A; +5Vsb/4A
|
|
Certification |
 
80PLUS
Platinum Certified
|
| |
|
|
| CPU |
- Monitors for CPU Cores,+1.5V, +3.3V, +5V,
+12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
- CPU Core 6-Phase-switching voltage
regulator
|
| FAN |
- Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I2C temperature sensing
logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Power Fail / Overheat LED
- Suspend-state Indicator LED
- UID LED
|
| Other
Features |
|
| |
|
|
RoHS
|
|
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X9DRG-HF
CSE-118GQ-R1800B |
1
1 |
Super X9DRG-HF Motherboard
1U Black SC118GQ Chassis |
| Air Shroud |
MCP-310-11802-0N |
1 |
Air Shroud for X9DRG used in
SC118GQ-R1800B |
| Backplane |
BPN-SAS-118G-4 |
1 |
SAS-118G-4; supports 4X2.5" SATA HDD,
|
| Cable 1 |
CBL-0157L-02 |
1 |
27cm SGPIO cable |
| Cable 2 |
CBL-0207L |
1 |
59CM SATA ROUND S-S PBF |
| Cable 3 |
CBL-0227L |
1 |
48CM SATA ROUND S-RA PBF |
| Cable 4 |
CBL-0228L |
2 |
55CM SATA ROUND S-RA PBF |
| Cable 5 |
CBL-0296L |
4 |
9ö 4 pin fan extension cord, for fan guide pin
at 1&3 or 1&4 |
| Cable 6 |
CBL-0333L |
3 |
6+2pin GPU power extension from MB GPU 8pin,
30cm |
| Cable 7 |
CBL-0460L |
1 |
8Pin to Two 4Pin Backplane Power Ext |
| Riser Card |
RSC-R1UG-E16A-X9 |
1 |
RSC-R1UG-E16A-X9-O-P |
| Riser Card |
RSC-R1UG-E16AR-X9 |
1 |
A Right Hand Side Riser Card with PCI-E x16 |
| Riser Card |
RSC-R1UG-E16B-X9 |
1 |
RSC-R1UG-E16B-X9-O-P
|
| Riser Card |
RSC-R1UG-E16R-X9 |
1 |
A 1U Right Hand Side Riser Card with PCI-E x16 |
| Heatsink / Retention |
SNK-P0047PS |
1 |
1U Passive CPU Heat Sink for X9 Generation
Motherboards w/ Narrow ILM |
| Heatsink / Retention |
SNK-P0047PSC |
1 |
1U Passive Front CPU Heat Sink for X9DRG-HF 1U
GPU Server |
| Power Supply |
PWS-1K81P-1R |
2 |
1800W Platinum Redundant Single Output |
| Cable 8 |
CBL-0160L |
2 |
US power cord 16AWG 6ft, PBF (default for high
watt) |
| Fan 1 |
FAN-0141L4 |
10 |
40x40x56 mm 20.5K RPM / 17.6K RPM
Counter-rotating Fan |
| Drive Tray(s) |
MCP-220-00047-0B |
4 |
Black gen 3rd hot-swap 2.5inch HDD tray |
| Mounting Rails |
MCP-290-00054-0N |
1 set |
Rail set, quick/quick, optional for 1U 17.2 |
| Add-on Card |
AOC-GPU-NVM2090 |
3 |
NVIDIA M2090 TESLA FERMI GPU |
|
|
|
 |
|
 |
|