 |
 |
 |
|
|
 | | SYS-6027TR-D70RF+ | - SuperServer 6027TR-D70RF+ (Black)
|
| | |
| | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP *)
* Please contact your Supermicro sales representative for additional details | | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | |
| | |
| | Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1TB DDR3 ECC LRDIMM
- Up to 512GB DDR3 ECC Registered memory (RDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | Chipset | | | SAS | - LSI 2008 SAS2 (6Gbps)
(BPN-ADP-SAS2-L6i) - RAID 0, 1, 10 support
| | SATA | - SATA 2.0 & 3.0 with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | |
| | |
| | Serial ATA | - 6x SATA 3.0 ports (6Gbps)
| | SAS | | | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 5x USB 2.0 ports total
(2 rear + 2 via header + 1 Type A)
| | VGA | | | Serial Port / Header | |
|  | | |
| | Form Factor | | | Model | |
| | |
| | Width | | | Height | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
- UID button
| | LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| | |
| | PCI-Express | |
| | |
| | Hot-swap | - 6x Hot-swap 3.5" SATA/SAS HDD trays
|
| | |
| | Fans | - 4x 8cm heavy duty PWM fans with optimal fan speed control
|
| | |
| | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | | AC Input | - 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
| | DC Output | - 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
| | Certification |  
Platinum Certified
[ Test Report ] |
| | |
| | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
| | | Part Number | Qty | Description | | Motherboard / Chassis | MBD-X9DRT-HF+
CSE-827HD-R1K28MB | 2
1 | Super X9DRT-HF+ Motherboard
2U Chassis | | Backplane | BPN-ADP-SAS2-L6I-O-P | 2 | BPN,BPN-ADP-SAS2-L6i,LSI2008,PBF | | Backplane | BPN-SAS-827HD | 1 | Sup 6x3.5ö SATA hdd; hot swap | | Heatsink / Retention | SNK-P0048PS | 4 | 2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM | | Power Supply | PWS-1K28P-SQ | 2 | 1U 1280W, redundant single output power supply |
|
|
|
 |
|
 |
|
Key Features
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†2. Up to 1TB ECC DDR3, up to
1866MHz; 16x DIMM sockets3. 1x MicroLP PCI-E 3.0 x8 slot4. Intel® i350 Dual port Gigabit Ethernet5. 6x Hot-swap 3.5" SAS2/SATA3
HDD Bays6. LSI 2008 SAS2 Controller
(BPN-ADP-SAS2-L6i)7. 1280W Redundant Power Supplies
Platinum Level
|
|
|
|
|
|
|