 |
 |
 |
|
|
SBA-7142G-T4
|
Processor Blade SBA-7142G-T4 (Black)
|
|
CPU
|
Quad 1944-pin Socket G34
Supports up to four 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
HT3.0 Link support
|
|
Chipset
|
AMD SR5650/SP5100
|
|
Memory Capacity
|
16x 240-pin DIMM sockets
Supports up to 512 GB 1600/1333/1066MHz DDR3 ECC Registered memory
Supports up to 64 GB 1600/1333/1066MHz DDR3 ECC Unbuffered memory
Memory Mirroring supported
|
|
Memory Type
|
1600/1333/1066MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes
|
1GB, 2GB, 4GB , 8GB, 16GB , 32GB
|
|
Memory Voltage
|
1.5 V and 1.35 V
|
|
Error Detection
|
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
InfiniBand Support
|
4x QDR / DDR (40/20Gb/s) InfiniBand mezzanine HCA (Optional)
|
|
SATA
|
AMD 5100/5650
RAID 0, 1 support
|
|
IPMI
|
Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
|
|
Network Controllers
|
ntel® 82576 Dual-Port Gigabit Ethernet
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
|
|
Super I/O
|
Winbond 83527 chip
|
|
Clock Generator
|
CK505 chip
|
|
KVM
|
1 Front Connector for Supermicro KVM Card
|
|
BIOS Type
|
32Mb SPI Flash EEPROM with AMI® BIOS
|
|
BIOS Features
|
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
|
|
Height
|
11.32" (288 mm)
|
|
Width
|
1.67" (42.4 mm)
|
|
Depth
|
20.5" (520.7mm)
|
|
Weight
|
17 lbs (7.71 kg)
|
|
Available Colors
|
Black
|
|
Buttons
|
Power On/Off button
KVM button
|
|
LEDs
|
Power LED
UID / KVM LED
Network Activity LED
Fault LED
|
|
Connector
|
SUV (Serial/USB/Video) & KVM Connector
|
|
Hot-swap
|
4x 2.5" SATA Hot-swap drive bays
|
|
Operating Environment / Compliance
|
|
Environmental Spec
|
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
|
|
Electromagnetic Compatibility (EMC)
|
|
United States / Canada
|
FCC- Emissions (US) Verification
|
|
Europe
|
EN55022 - Emissions
EN55024 - Immunity
EN61000-3-2 - Harmonics
EN61000-3-3 - Voltage Flicker
CE - EMC Directive 89/336/EEC
|
|
United States / Canada
|
UL60950-1 - CSA/CUL 60950-1
|
|
Europe
|
EN60950-1, CE - Low Voltage Directive 73/23/EEE
|
|
|
Part Number
|
QTY
|
Description
|
|
Motherboard
|
MBD-BHQGE -O-P
|
1
|
Super BHQGE Motherboard
|
|
Chassis
|
CSE-710M-240B
|
1
|
Black Front Blade Chassis (B = Black)
|
|
Hard Drive Backplane
|
BPN-SB-SATA-O-P
|
1
|
SATA Hard Drive Backplane
|
|
Front Panel Control
|
MCP-280-KVMT-O-P
|
2
|
Power & KVM buttons, LED, KVM connector
|
|
|
Part Number
|
QTY
|
Description
|
|
Heatsink / Retention
|
(front) SNK-P1034P
(rear) SNK-P1035P
and SNK-P1036P
|
2
1
1
|
Heatsinks for AMD Socket G34
|
|
Networking
|
AOC-XEH-iN2
AOC-IBH-XDD
AOC-IBH-XQD
AOC-IBH-XQS
AOC-IBH-XDS
|
1
1
1
1
1
|
Dual Port 10G Ethernet AOC for Blade
InfiniBand Dual-Port 4x DDR 20Gbps Mezzanine HCA (Mellanox ConnectX chip)
InfiniBand Dual-Port 4x QDR 40Gbps Mezzanine HCA (Mellanox ConnectX-2 chip)
InfiniBand Single port 4x QDR 40Gbps Mezzanine HCA (Mellanox ConnectX chip)
InfiniBand Single port 4x DDR 20Gbps Mezzanine HCA (Mellanox ConnectX chip)
|
|
|
|
 |
|
 |
|
Key Features
- Four AMD Opteron™ 6000 series
(6300P* ready) processors (Socket G34)
16/12/8/4-Core ready; HT3.0 Link
support
- AMD SR5650/SP5100 Chipset
- Up to 512GB DDR3 1600/1333/1066MHz
ECC Registered DIMM in 16 DIMM slots
- Dual-Port Gigabit Ethernet
- 4x 2.5" Hot-Plug SATA Drive Trays
- Integrated IPMI2.0 w/ remote KVM and
virtual media
- Mellanox ConnectX QDR InfiniBand
40Gbps or 10GbE support (Optional)
Requires SBE-720E Enclosure
|
|
|
|
|
|
|