 |
 |
 |
|
New Page 1
 |
|
MBD-H8DCL-6F |
- H8DCL-6F (Standard Retail
Pack)
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
|
| |
|
|
|
CPU |
- Dual 1207-pin Socket C32
- Supports two
8/6/4-Core ready AMD Opteron™ 4000 Series
processors
- HT3.0 Link support
|
| Chipset |
- AMD chipset SR5690 + SP5100
|
| |
|
|
|
Memory Capacity |
- 8 DIMM sockets
- Supports up to 256GB
Registered ECC or 64GB Unbuffered
ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8
DIMMs
- Dual channel memory bus
- For Dual CPUs: Recommended
that memory be populated equally in adjacent
memory banks
-
See Detailed Memory Support Matrix
|
|
Memory Type |
- Registered ECC or unb. ECC
/ non-ECC DDR3 1600/1333/1066 MHz SDRAM
72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes |
- 1GB, 2GB, 4GB, 8GB, 16GB,
32GB
|
|
Memory Voltage |
|
| |
|
|
|
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
|
SAS |
- LSI 2008 8 port SAS
controller
- RAID 0, 1, 10; RAID 5
Optional
- Optional:
AOC-SAS2-RAID5-KEY
RAID 5 support
|
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- IPMI 2.0 with virtual media
over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
|
Network Controllers |
- 2 Intel® 82574L single-port
Gigabit Ethernet Controllers
- 10/100/1000BASE-T support
|
|
VGA |
|
|
Super I/O |
|
| |
|
|
|
SATA |
|
|
SAS |
- Integrated LSI 2008 SAS2
Controller
- Eight Serial Attached SCSI
(SAS) ports
|
|
LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN
supports IPMI
|
|
USB |
- 7x USB 2.0 ports
- 2 rear, 1 Type-A, 2 headers
for 4 ports
|
|
VGA |
|
|
Serial Ports |
- 2x Fast UART 16550 serial
port (one header & one port)
|
|
Power |
- SSI 24-pin + 8-pin + 8-pin
power connectors / EPS12V
Note: Two 8-pin connectors are required to
support 2 CPUs due to SSI spec
|
|
Others |
- 1 SATA DOM power connector,
TPM header
|
| |
|
|
|
PCI-E |
- 1 PCI-E 2.0 x8 (in x16
slot)
- 3 PCI-E 2.0 x8
- 1 PCI-E 2.0 x4 (in x8 slot)
- 1 PCI
|
|
 |
|
|
|
|
|
3U/Mid Tower |
|
|
Tower/4U Rackmount |
|
- Recommendation:
- 1. Strongly suggest using
SuperMicro recommended chassis
- 2. Active Heatsink
SNK-P0024AP4 is recommend used on tower and
4U chassis
|
| |
|
|
|
BIOS Type |
- 16Mb SPI Flash ROM with
AMI® BIOS
|
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
Software |
|
|
Power Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
|
| |
|
|
|
CPU |
- Monitors CPU Core Voltages,
+1.8V, +3.3V, +5V, +12V, +3.3V Standby,
VBAT, HT, memory, chipset
- CPU switching voltage
regulator
|
|
FAN |
- Up to 6-fan status
tachometer monitoring
- Up to 6x 4-pin fan headers
- Status monitor for speed
control
- 4-pin fan support (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM)
fan connectors
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan
connectors
- I2C Temperature
Sensing Logic
|
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
|
Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
| |
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
| |
Part Number |
Qty |
Description |
|
H8DCL-6F |
MBD-H8DCL-6F -O |
1 |
H8DCL-6F
Motherboard |
| Retention |
BKT-0012L |
2 |
RETENTION MODULE FOR
AMD CPU SOCKET F,ROHS |
| I/O Cable 1 |
CBL-0044L |
8 |
57.5CM SATA FLAT S-S
PBF |
| I/O Cable 2 |
CBL-0083L |
1 |
15.7" USB 2.0 2-PORT
W/KEY |
| I/O Cable 3 |
CBL-010L |
1 |
9 PIN SERIAL PORT DTK
CABLE, LF |
| I/O Cable 4 |
CBL-036L-03 |
1 |
18" ATA 133/100/66
3-DROP TPE CABLE, PBF |
| I/O Shield |
MCP-260-00027-0N |
1 |
STD I/O SHIELD FOR X8,
H8, X7SB3 SERVER MB (3RD LAN + 4XLAN) |
|
|
|
|
|
|
 |
|
 |
|
Key Features
New Page 1
1. Dual AMD Opteron™ 4000 series
(4300 ready) processors (Socket C32)
8/6/4-Core ready; HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 256GB DDR3 1600MHz ECC
Registered DIMM; 8x DIMM sockets
4. Dual Intel?82574 Gigabit Ethernet
Controller
5. LSI 2008 8-Port 6 Gbps SAS
Controller RAID 0, 1, 10; RAID 5
optional
6. 6x SATA (3.0 Gb/s) ports via
AMD SP5100 controller, RAID 0, 1, 10
7. Expansion slot:
1 PCI-E 2.0 x8 (in x16 slot)
3 PCI-E 2.0 x8
1 PCI-E 2.0 x4 (in x8 slot)
1 PCI
8. Integrated Matrox G200eW Graphics
9. Integrated IPMI 2.0 with Dedicated
LAN
|
|
|
|
|
|
|