 |
|
MBD-H8DCT-HIBQF-B |
|
| |
|
|
|
Form Factor |
|
|
Dimensions |
- 6.8" x 16.64" (16.4cm x
42.3cm)
|
| |
|
|
|
CPU |
- Dual 1207-pin Socket C32
- Supports two
8/6/4-Core ready AMD Opteron™ 4000 Series
processors
- HT3.0 Link support
|
| Chipset |
- AMD chipset SR5690 + SP5100
|
| |
|
|
|
Memory Capacity |
- 12 DIMM sockets
- Support up to 192GB
Registered ECC or 64GB Unbuffered ECC/non-ECC
DDR3 1600/1333/1066 SDRAM in 12 DIMMs slots
- Dual channel memory bus
- For Dual CPUs: Recommended
that memory be populated equally in adjacent
memory banks
-
See Detailed Memory Support Matrix
|
|
Memory Type |
- DDR3 1600/1333/1066 MHz
Registered ECC or Unbuffered ECC/non-ECC
SDRAM 72-bit, 240-pin gold-plated DIMMs
|
|
DIMM Sizes |
|
|
Memory Voltage |
|
| |
|
|
|
Infiniband |
- Mellanox Connect-X2 QDR
Infiniband 40Gbps Controller
|
|
SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
|
IPMI |
- Support for Intelligent
Platform Management Interface v.2.0
- IPMI 2.0 with virtual media
over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
|
Network Controllers |
- Intel® I350 Dual Gigabit
Ethernet LAN controller
- 10/100/1000BASE-T support
|
|
VGA |
|
|
Super I/O |
|
| |
|
|
|
SATA |
|
|
LAN |
- 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN
supports IPMI
|
|
USB |
- 4x USB 2.0 ports
- 2x Rear, 1x header (2
ports)
|
|
VGA |
|
|
Serial Ports |
- 1x Fast UART 16550 serial
port
|
|
Others |
|
| |
|
|
|
PCI-E |
- 1 PCI-E 2.0 x16
- 1 PCI-E 2.0 x8 (in x4 slot)
for SMC SAS adapter card support
|
|
 |
|
|
|
|
|
2U Twin & 2U Twin^2 |
- SC827H, SC827HQ/HD,
SC217HQ/HD
|
| |
|
|
|
BIOS Type |
- 16Mb SPI Flash ROM with
AMI® BIOS
|
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
Software |
|
|
Power Configurations |
- ACPI Power Management
- Keyboard Wakeup from
Soft-Off
- Power-on mode control for
AC power loss recovery
|
| |
|
|
|
CPU |
- Monitors CPU Core Voltages,
+1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT,
HT, memory, chipset
- CPU switching voltage
regulator
|
|
FAN |
- Up to 3-fan status
tachometer monitoring
- Up to three 4-pin fan
headers
- Status monitor for speed
control
- 3-pin fan support (w/o
speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM)
fan connectors
|
|
Temperature |
- Monitoring for CPU and
chassis environment
- CPU Thermal Trip Support
- Thermal control for 8x Fan
connectors
- I2C Temperature
Sensing Logic
|
|
LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative
Humidity:
8% to 90% (non-condensing)
- Non-operating Relative
Humidity:
5% to 95% (non-condensing)
|
| |
|
|
|
FCC |
- Passed to meet FCC standard
requirement
|
|