 |
 |
 |
|
New Page 1
 |
|
MBD-H8DI3+ |
|
| |
|
|
| Form
Factor |
|
|
Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
|
| CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core /
Quad-Core AMD Opteron™ 2000 Series processors**
- HT3.0 Link support
|
| Chipset |
- AMD chipset SR5690 + SP5100
|
| |
|
|
| Memory
Capacity |
- Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz
memory *
- Dual channel memory bus
- Single or Dual (recommended) channel memory
support
- For Dual CPUs: Recommended that memory be
populated equally in adjacent memory banks
|
| Memory
Type |
- DDR2 800/667/533 MHz Registered ECC SDRAM
72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB
|
| Memory
Voltage |
|
| |
|
|
| SATA |
- AMD SP5100 (RAID 0, 1, 10)
|
| SAS |
- LSI 1068E 8 port SAS controller
- RAID 0, 1, 10; RAID 5 Optional
- IButton68 (Optional:
AOC-IButton68)
RAID 5 support
|
|
Network Controllers |
- Two Intel® 82574L controller, Dual-Port
Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA |
- Matrox G200 16MB DDR2
16MB Graphics & VGA port
|
| Super
I/O |
|
| |
|
|
| SATA |
|
| SAS |
- Integrated LSI 1068E SAS Controller ^
- Eight Serial Attached SCSI (SAS) ports
- Each SAS port supports up to 4 SAS / SATA
drives
|
| IDE |
- Single EIDE channel support up to two UDMA
IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| LAN |
|
| Floppy |
|
| USB |
- 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
| VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial
Ports |
- 1x Fast UART 16550 serial port
- 1x serial port header
|
| Others |
- 1 SATA DOM power connector
|
| |
|
|
|
PCI-Express |
- 2x PCI-e 2.0 x16 (x8 signals) slots
- 1x PCI-e 2.0 x8 slot
- 1x PCI-e 2.0 x8 (x4 signals) slot
|
| PCI-X |
- 2x PCI-X 64-bit 133/100MHz slots
|
|
 |
| |
|
|
| BIOS
Type |
- 16Mb SPI Flash ROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
Software |
|
| Power
Configurations |
- ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss
recovery
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +1.8V, +3.3V,
+5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN |
- Up to 8-fan status tachometer monitoring
- Up to eight 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support (w/o speed control)
- Low noise fan speed control
(4-pin fan only)
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| Other
Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|
|
|
|
 |
|
 |
|
Key Features
New Page 1
Key Features
1. Two Six-Core / Quad-Core
AMD Opteron™ 2000 Series (Socket
F) support; HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 128GB Reg. ECC DDR2
800/667/533 SDRAM in 16 DIMM
4. Two Intel® 82574L controllers,
Dual-Port Gigabit Ethernet
5. 6x SATA2 3.0Gbps Ports via
AMD SP5100 controller, RAID 0, 1, 10
6. 2x PCI-e 2.0 x16 (x8 signals),
1x PCI-e 2.0 x8 (x4 signals),
1x PCI-e 2.0 x8,
2x PCI-X 133/100
7. LSI 1068E 8 port SAS controller,
RAID 0, 1, 10; RAID 5 Optional
8. 8x Fans with Speed Control
9. Integrated Matrox G200eW Graphic
|
|
|
|
|
|
|