 |
|
MBD-H8DMi-2 |
|
| |
|
|
| Form
Factor |
|
|
Dimensions |
- 12" x 13.05" (30.5cm x 33.2cm)
|
| |
|
|
| CPU |
- Dual 1207-pin Socket F
- Supports up to two Six-Core /
Quad-Core / Dual-Core AMD Opteron™ 2000 Series
processors
- HT3.0 Link support ^
|
| Chipset |
- nVidia MCP55 Pro
- AMD 8132
|
| |
|
|
| Memory
Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 64 GB DDR2 800/667/533 MHz
memory
- For Single CPU: Memory must be populated in
CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be
populated equally in adjacent memory banks
- Dual channel memory bus
|
| Memory
Type |
- DDR2 800/667/533 MHz ECC, reg. ECC SDRAM
72-bit, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB
|
| Memory
Voltage |
|
| |
|
|
| SATA |
- nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
| IPMI |
|
|
Network Controllers |
- nVidia MCP55 Pro Chipset Dual-port LAN /
Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and
1000BASE-T, RJ45 output
|
| VGA |
- ATI ES1000 Graphics Controller
16MB Graphics & VGA port
|
| Super
I/O |
|
| |
|
|
| SATA |
|
| IDE |
- Single EIDE channel support up to two UDMA
IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy |
- 1 Floppy port; 1.44 MB support
|
| LAN |
|
| USB |
- Up to 6 USB Ports 2.0 Compliant, 1.1
Compatible
- 2 Rear Ports
- 4 Internal Headers
|
| VGA |
|
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial
Ports |
- 1 Fast UART 16550 serial port
- 1 serial port header
|
|
Parallel Port |
- 1 ECP / EPP parallel port
|
| Others |
- 1 SATA DOM power connector
|
| |
|
|
|
PCI-Express |
- 2 x8 PCI-e slots
- 1 x4 PCI-e (in a x8 physical slot)
- 1 SEPC (Supermicro extended Power
Connector) slot for 2U active riser cards w/ a power
extension (i.e. CSE-RR2UE-AX)
|
| PCI-X |
- 1 64-bit 133MHz PCI-X (3.3V) slots
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
|
| IPMI |
|
|
 |
|
|
|
|
| 2U
Chassis |
|
| Tower
/ 4U Rackmount |
|
|
Important Chassis Notes |
- To ensure system stability, a 550W
(minimum) ATX power supply
[ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]
|
| |
|
|
| BIOS
Type |
- 8Mb Flash EEPROM with AMI® BIOS
|
| BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
|
|
|
Software |
- Optional IPMI (Intelligent Platform
Management Interface) 2.0
-
Super
Doctor III
- Watch Dog
|
| Power
Configurations |
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss
recovery
- Internal/External modem remote ring-on
|
| |
|
|
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V,
±12V, 5V Standby, VBAT
- CPU switching voltage regulator
|
| FAN |
- Up to 8-fan status tachometer monitoring
- Up to six 3-pin & two 4-pin fan headers
- Status monitor for speed control
- 3-pin fan support
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip Support
- I2C Temperature Sensing Logic
|
| LED |
- CPU / System Overheat LED
- +5V Standby Alert LED
|
| Other
Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
- Chipkill Support
|
| |
|
|
RoHS
|
|
|
Environmental Specifications |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
| |
|
|
| FCC |
- Passed to meet FCC standard requirement
|
|