 |
MBD-H8SSL-i2 |
|
|
 |
Form
Factor |
|
Dimensions |
- 12.0" x 8.0" (30.5cm x 20.3cm)
|
|
 |
CPU |
- Single 940-pin AM2 Socket
- Supports one Quad-Core AMD Opteron™
1000 Series
(Socket AM2) processor
NOTE: Motherboard PCB revision 2.xx is
needed to support quad-core processor
|
System Bus |
|
Chipset |
|
|
 |
Memory
Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB DDR2 800/667/533 MHz
memory
- Single or Dual (recommended) channel memory
|
Memory
Type |
- DDR2 800/667/533MHz un-buffered ECC / non-ECC
SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM
Sizes |
|
Memory
Voltage |
|
|
 |
SATA |
- 4 SATA Ports using ServerWorks HT1000
controller
|
IDE |
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA/100
|
IPMI |
|
Network Controllers |
- Broadcom BCM5704C Dual Gigabit Ethernet
Controller
- Supports 1000BASE-T, RJ45 output
|
VGA |
- ATI ES1000 Graphics Controller
16MB Graphics & VGA port
|
Super
I/O |
|
|
 |
SATA |
|
IDE |
- Single ATA 100 EIDE channels support up to
two UDMA IDE devices
- Supports UDMA Mode 5
- Supports ATA/100
|
Floppy |
|
LAN |
|
USB |
- 2 USB Rear Ports
- 4 USB Internal Headers
- USB 2.0 Compliant, 1.1 Compatible
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial
Ports |
- 1 Fast UART 16550 serial ports
- 1 Header
|
|
 |
 |
 |
1U
Chassis |
|
Important Chassis Notes |
- To ensure system stability, a 300W
(minimum) ATX power supply
[4-pin (+12V) and 24-pin are required]
|
|
 |
PCI-X |
- 1 64-bit 133MHz PCI-X (3.3V) slot
|
PCI |
- 2 PCI 32-bit, 33MHz expansion slots
|
|
 |
BIOS
Type |
- 4Mb Flash EEPROM with AMI® BIOS
- SST-49LF004B BIOS Chip
|
BIOS
Features |
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS Rescue Hot Keys
- SMBIOS 2.3
- USB Keyboard support
- Hardware BIOS Virus Protection
|
|
 |
Software |
|
Power
Configurations |
- ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Main Switch Override Mechanism
- Power-on mode control for AC power loss
recovery
- Internal/External modem remote ring-on
|
|
 |
CPU |
- Monitors CPU Core Voltages, +5V, ±12V, 5.5V
Standby, 2.5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V,
DDR termination 1.25V
- CPU switching voltage regulator
|
FAN |
- Total up to five 3-pin fan headers
- 5 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- I2C temperature sensing logic
|
LED |
- CPU / Overheat LED
- Suspend-state indicator LED
- +5V Standby Alert LED
|
Other
Features |
- Chassis Intrusion Header
- Chassis Intrusion Detection
- SDDC Support
- Chipkill Support
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to
95°F)
- Non-operating Temperature: -40°to 70°C
(-40°to 158°F)
- Operating Relative Humidity: 8% to 90%
(non-condensing)
- Non-operating Relative Humidity: 5 to 95%
(non-condensing)
|
|
 |
FCC |
- Passed to meet FCC standard requirement
|
|