System | Form Factor | 1U Rackmount |
Chassis Model | GT62F |
Dimension (D x W x H) | 24.6" x 17.2" x 1.72" (625.4 x 436 x 43.6mm) |
Motherboard Name | S8026GM2NRE |
Gross Weight | 20 kg (44 lbs) |
Net weight | 10.5kg (23.5 lbs) |
Front Panel | Buttons | (1) ID / (1) PWR w/ LED / (1) RST |
LEDs | (1) HDD / (1) PWR / (2) LAN / (1) BMC event |
I/O Ports | (2) USB 3.0 ports |
External Drive Bay | Q'ty / Type | (10) 2.5" Hot-Swap HDD/SSDs |
Front Drive Bay Interface | (10) NVMe U.2 |
Front HDD Backplane Support | NVMe |
Notification | The SAS/SATA HDD backplane is connected to onboard SATA connection by default. Please contact Tyan technical support if a discrete SAS HBA/RAID adapter is required. |
System Cooling Configuration | FAN | (4) 4cm fans |
Power Supply | Type | RPSU |
Input Range | AC 100-240V/9A |
Frequency | 50-60 Hz |
Output Watts | 650 Watts |
Efficiency | 80 plus Platinum |
Redundancy | 1+1 |
Processor | Q'ty / Socket Type | (1) AMD Socket SP3 |
Supported CPU Series | (1) AMD EPYC™ 7001/7002 Series Processor |
Thermal Design Power Wattage | Max up to 180W (cTDP) |
Memory | Supported DIMM Qty | (16) DIMM slots |
DIMM Type / Speed | DDR4 ECC RDIMM/LRDIMM 2666/2400 |
Capacity | Up to 1,024GB RDIMM/LRDIMM |
Memory channel | 8 Channels per CPU |
Memory voltage | 1.2V |
Notification | LRDIMM is not supported when AMD EPYC™ 7002 Series Processors deployed in all configurations. Please contact Tyan Technical Support for more details. |
Expansion Slots | PCIe | (2) PCIe Gen.3 x16 slots (FH/HL) |
Pre-installed TYAN Riser Card (PCIe Gen.3) | (1) M7106-L16-1F riser card for (1) PCIe Gen.3 x16 slot (left) / (1) M7106-R16-1F riser card for (1) PCIe Gen.3 x16 slot |
Others | (1) PCIe Gen.3 x16 OCP 2.0 slot (conn.A+conn.B) |
Physical Dimension Abbreviation | FH/FL (Full-height / Full-length): 4.4" x 12.3" (111.2 x 312mm) |
LAN | Q'ty / Port | (2) GbE ports + (1) GbE dedicated for IPMI |
Controller | Broadcom BCM5720 |
PHY | Realtek RTL8211E |
Storage NVMe | Connector (OCuLink) | (5) SFF-8612 for (10) NVMe ports |
Connector (M.2) | (2) 22110/2280/2260/2242 (by PCIe & SATA interface) |
Notification | 2 onboard M.2 connectors shall support NVMe only when AMD EPYC™ 7002 Series Processors deployed in all configurations. Please contact Tyan Technical Support for more details. |
Graphic | Connector type | D-Sub 15-pin |
Resolution | Up to 1920x1200 |
Chipset | Aspeed AST2500 |
I/O Ports | USB | (2) USB3.0 ports (@ front) / (2) USB3.0 ports (@ rear) |
COM | (1) DB-9 port (COM1) + (1) header (COM2) |
VGA | (1) D-Sub 15-pin port |
RJ-45 | (2) GbE ports + (1) dedicated GbE for IPMI |
TPM (Optional) | TPM Support | Please refer to our TPM supported list. |
System Monitoring | Chipset | Aspeed AST2500 |
Temperature | Monitors temperature for CPU & memory & system environment |
Voltage | Monitors voltage for CPU, memory, chipset & power supply |
LED | Over temperature warning indicator / Fan & PSU fail LED indicator |
Others | Watchdog timer support |
Server Management | Onboard Chipset | Onboard Aspeed AST2500 |
AST2500 iKVM Feature | 24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub |
AST2500 IPMI Feature | IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface |
BIOS | Brand / ROM size | AMI / 32MB |
Feature | Hardware Monitor / Boot from USB device/PXE via LAN/Storage / Console Redirection / User Configurable FAN PWM Duty Cycle / SMBIOS 3.1/PnP/Wake on LAN / ACPI 6.1 / ACPI sleeping states S0,S1,S5 |
Operating System | OS supported list | Please refer to our AVL support lists. |
Regulation | FCC (SDoC) | Class A |
CE (DoC) | Class A |
CB/LVD | Yes |
RCM | Class A |
VCCI | Class A |
Operating Environment | Operating Temp. | 10° C ~ 35° C (50° F~ 95° F) |
Non-operating Temp. | - 40° C ~ 70° C (-40° F ~ 158° F) |
In/Non-operating Humidity 90 | 90%, non-condensing at 35° C |
Package Contains | Barebone | (1) GT62F-B8026 Barebone |
Manual | (1) Quick Installation Guide |
Installation CD | (1) TYAN Device Driver CD |
RoHS | RoHS 6/6 Compliant |